Connecting Battery Cables - Invacare XTERRA GT User Manual

Power chair

Hide thumbs Also See for XTERRA GT:

Table of Contents

8.2

Connecting battery cables

WARNING

•

NEVER allow any of your tools and/or battery cable(s) to contact BOTH battery terminal(s)/

post(s) at the same time. An electrical short may occur and serious personal injury or damage

may occur.

•

The use of rubber gloves and chemical goggles is recommended when working with batteries.

Perform one (1) of the following methods for connecting the battery cable(s):

•

For group 22 NF Batteries that have mounting holes in the battery terminal(s)/post(s) - Use

direct mount method.

•

For group 22 NF Batteries that do not have mounting holes in the battery terminal(s)/post(s) -

Use battery clamp method.

Direct Mount method (FIGURES 4 and 5)

1. Install battery terminal cap(s) onto battery cable(s) as follows:

•

RED battery terminal cap onto red battery cable.

•

BLACK battery terminal cap onto Black battery cable.

CAUTION

•

When connecting the battery cables to the battery(ies), the battery cable(s) MUST be con-

nected to the battery terminal(s)/post(s) depending on battery type, otherwise damage to the

battery cable may result when installing battery terminal caps.

Table of Contents