Invacare XTERRA GT User Manual page 23

TRANSFERRING TO AND FROM OTHER SEATS
• ALWAYS turn the wheelchair power OFF and engage the motor locks/clutches to prevent the
wheels from moving BEFORE attempting to transfer in or out of the wheelchair. Also, make
sure every precaution is taken to reduce the gap distance by turning both rear castors away
from the object you are transferring onto.
• When transferring, position yourself as far back as possible in the seat. This will prevent broken
screws, damaged upholstery and the possibility of the
wheelchair tipping forward.
• Note: This activity may be performed independently provided
you have adequate mobility and upper body strength.
• Position the wheelchair as close as possible along side the
seat to which you are transferring, with the rear castors
pointing away from it.
• Engage motor locks/clutches.
• Shift body weight into seat with transfer.
• During independent transfer, little or no seat platform will be
beneath you. Use transfer board if at all possible.
23