Clutch Replacement - Joyner JNSZ650DLB Owner's Manual And Parts Manual

Clutch replacement

Do not remove the whole engine from vehicle when you replace the clutch, but
you'll need to remove rear suspension, driven shaft, clutch cable, muffler, wires
and rubber cushion that is in the middle of transmission and frame.
1. Remove bolt M14 (See Figure 28)
Bolt M14
Figure 28
2. Remove two bolts (M12) on the starter (See Figure 30), Remove the starter (See
Figure 29)
Bolt M12
Starter
Figure 29
Figure 30
3. Remove two nuts (M14) on two side of transmission (See Figure 31,Figure 32)
Bolt M14
Bolt M14
Figure 31
Figure 32