Attach Tie Rod And Front Whees - Joyner JNSZ650DLB Owner's Manual And Parts Manual

Attach tie rod and front whees

3
3
02.S650.03.01.01A
2
02.S650.03.01.04A
1
02.D650.05.01.03
No.
1. Install the shaft of outer tie rod end-1 to stub axle,R
from the underside (nut on top).
2. Install flat washer,spring washer then tighen nut.
Note: don't adjust outer tie rod end as wheel alignment is done before packing.
3. Attach the wheel(27*8-12),FR-2 on the hub, tighten the nuts.
4. Attach the wheel(27*8-12),FL-3 as described above .
Attach tie rod end and front wheel
tie rod end
stub axle,R
Erp code
1
S650.03.01.01.00A
S650.03.01.04.00A
D650.05.01.03.00
code name
2
left wheel(27*8-12)
right wheel(27*8-12)
tie rod end
Description
1
1
1
Q'ty