Digital Clock; Recommended Gear - Skoda Yeti Owner's Manual

As soon as the due date for the service is reached, a flashing key symbol  and
the text INSPEC _.appears in the display for around 20 seconds after the ignition
has been switched on.
The following is displayed in the information display:
Inspection now!
Displaying the distance and days until the next service interval
You can use the button to display the remaining distance and days until the
3
next service interval » Fig. 2 on page 8.
A key symbol  and the remaining distance appear in the display for 10 seconds.
The days remaining until the next service interval are displayed at the same time.
In vehicles equipped with the information display, this display can be called up
from the Settings menu » page 16.
The following will be displayed in the information display for 10 seconds:
Oil change ... km / ... days
Inspection ... km / ... days
CAUTION
We recommend that you do not reset the Service Interval Display yourself as this
can result in the incorrect setting of the Service Interval Display, which can also
cause possible problems with the operation of your vehicle.
Note
Information is retained in the Service Interval Display even after the vehicle bat-
■
tery is disconnected.
If the instrument cluster is exchanged after a repair, the correct values must be
■
entered in the counter for the Service Interval Display. This work is carried out by
a specialist garage.
For more information on the service intervals, see
■
ter service intervals.

Digital clock


First read and observe the introductory information and safety warn-
ings on page 8.
The clock is set with the buttons
3
» service schedule, chap-
and » Fig. 2 on page 8.
7
Select the display that you wish to change with the button
change with the button .
7
In vehicles equipped with the information display, it is also possible to set the
clock in the Time menu » page

Recommended gear


First read and observe the introductory information and safety warn-
ings on page 8.
The currently engaged gear
A
In order to minimise the fuel consumption, a recommendation for shifting into an-
other gear is indicated in the display.
If the control unit recognises that it is beneficial to change gear, an arrow
shown in the display. The arrow points up or down, depending on whether you
should shift into a higher or lower gear.
In vehicles with manual transmission, the recommended gear is displayed at the
same time instead of the gear selected
CAUTION

The driver is always responsible for selecting the correct gear in different driving
situations, such as overtaking.
and carry out the
3
16.
Fig. 4
Recommended gear
is shown in the instrument cluster display
A .
Instruments and Indicator Lights

» Fig. 4.
is
B

11