Skoda Yeti Owner's Manual
  1. Manuals
  2. Brands
  3. Skoda Manuals
  4. Automobile
  5. 2009 Yeti
  6. Owner's manual

Skoda Yeti Owner's Manual

Skoda car
Hide thumbs Also See for Yeti:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Owner's Manual, Manual
SIMPLY CLEVER
ŠKODA Yeti
Owner's Manual

Advertisement

Table of Contents
loading

Related Manuals for Skoda Yeti

Summary of Contents for Skoda Yeti

  • Page 1 SIMPLY CLEVER ŠKODA Yeti Owner's Manual...
  • Page 2 Also please pay attention to those parts in the Owner's Manual that are marked  below. Work with us – for the sake of the environment. Návod k obsluze Yeti anglicky 05.2012 S90.5610.06.20 5L0 012 003 GM...
  • Page 3 The on-board literature The Help on the Road brochure The on-board literature for your vehicle consists of this “Owner's Manual” as well The Help on the Road brochure contains the most important telephone numbers as a “Service schedule” and the “Help on the road” brochure. in individual countries as well as the addresses and telephone numbers of ŠKODA importers.

  • Page 4: Table Of Contents

    Luggage compartment Automatic gearbox Table of Contents Variable loading floor in the luggage Automatic gearbox compartment Communication Variable loading floor with spare wheel Layout of this Owner's Manual (explanations) Mobile phones and two-way radio systems Roof rack system Operating the phone on the multifunction Abbreviations Cup holder steering wheel...
  • Page 5 Environmental compatibility Jump-starting Driving abroad Towing the vehicle Avoiding damage to your vehicle Fuses and light bulbs Driving through water on the street Fuses Off-road driving Bulbs Towing a trailer Technical data Towing a trailer General Maintenance Technical data Introductory information Taking care of and cleaning the vehicle Weights Taking care of your vehicle...
  • Page 6 Table of Contents...

  • Page 7: Layout Of This Owner's Manual (Explanations)

    For the sake of the environment Layout of this Owner's Manual (explanations) An Environmental note draws your attention to environmental protection as- pects. This is where you will, for example, find tips aimed at reducing your fuel consumption. The Owner's Manual has been systematically designed in order to make it easy for you to search for and obtain the information you require.

  • Page 8: Abbreviations

    Abbreviations Abbreviation Definition Engine revolutions per minute Anti-lock brake system Multi-purpose vehicles Traction control in g/km discharged quantity of carbon dioxide in grams per driven kilo- meter Diesel particle filter Automatic double clutch gearbox Active driver-steering recommendation Electronic differential lock EPC fault light Stabilisation control Kilowatt, measuring unit for the engine output...
  • Page 9 Fig. 1 Cockpit Using the system...

  • Page 10: Using The System

    Bonnet release lever Using the system Regulator for the instrument lighting and regulator for the head- light beam range adjustment 48, 49 Lever for adjusting the steering wheel Cockpit Driver’s knee airbag Ignition lock TCS switch Overview Front and rear parking aid Central locking system Electric exterior mirror adjustment Depending on equipment fitted:...

  • Page 11: Instruments And Warning Lights

    Overview of the Instrument cluster Instruments and warning lights Instrument cluster ä Introduction This chapter contains information on the following subjects: Overview of the Instrument cluster Engine revolutions counter Speedometer Coolant temperature gauge Fuel gauge Counter for distance driven Service Interval Display Fig.

  • Page 12: Engine Revolutions Counter

    Fuel gauge » page 12 Coolant temperature gauge Button for: › Reset trip counter for the distance driven ä First read and observe the introductory information and safety warn- › Resetting Service Interval Display ings on page 10. › Set hours/minutes ›...

  • Page 13: Fuel Gauge

    The distance which you have driven with your vehicle is shown in kilometres (km). ings on page 10. In some countries the measuring unit (mph) is used. The display can vary depending on the equipment. £ Valid for Yeti 4x4. Using the system...

  • Page 14: Digital Clock

    Service Interval Display CAUTION Before the next service interval a key symbol  and the remaining kilometres are indicated for 10 seconds after switching on the ignition » Fig. 3. At the same time, We recommend that you do not reset the Service Interval Display yourself as this the remaining days until the next service interval are displayed.

  • Page 15: Multi-Functional Indicator (Onboard Computer)

    Driving time Recommended gear Current fuel consumption Average fuel consumption Fig. 4 Range Recommended gear Distance travelled Average speed Current speed Oil temperature Warning against excessive speeds The multi-functional indicator can only be operated when the ignition is switched on. After the ignition is switched on, the function displayed is the one which you last selected before switching off the ignition.

  • Page 16: Memory

    Note Memory All information in the memory 1 and 2 is erased if the battery of the vehicle is dis- Fig. 5 connected.  Multi-functional indicator Operation ä First read and observe the introductory information and safety warn- ings on page 14. The multi-functional indicator is equipped with two automatic memories.

  • Page 17: Outside Temperature

    › Press the button or, where applicable, the button for more than 1 second. The driving time which has elapsed since the memory was last erased, appears in the display. If you wish to measure the driving time from a particular time, you The following readouts of the selected memory will be set to zero with the but- must set the memory to zero at this moment in time by pressing the button on the windshield wiper lever or with the button...

  • Page 18: Range

    The average speed since the memory was last erased is shown in the display in Note km/hour » page 15. If you wish to determine the average speed over a certain pe- riod of time, you must set the memory to zero at the start of the measurement The amount of fuel consumed will not be indicated.

  • Page 19: Maxi Dot (Information Display)

    › Set the desired speed limit, e.g. 50 km/h, with the button on the windshield MAXI DOT (information display) wiper lever or the adjustment wheel on the multi-function steering wheel. › Use the button on the windshield wiper lever or the adjustment wheel on the multi-function steering wheel to confirm the desired speed limit, or wait ä...

  • Page 20: Settings

    The menu points Audio and Navigation are only displayed when the factory-fitted Main menu radio or navigation system is switched on. The menu point Aux. heating is only displayed if a factory-fitted auxiliary heating is installed. The menu point Assistants is only then displayed, if the vehicle is fitted with cor- nering lights.
  • Page 21 After selecting the menu point Back you will reach one level higher in the menu. Coming Home Switch on/off and adjust the light duration of the Com- ing Home function. Language Leaving Home Switch on/off and adjust the light duration of the Com- This is where the language in which the warning and information texts should be ing Home function.

  • Page 22: Auto Check Control

    Factory Setting As long as the operational faults are not rectified, the symbols are always indica- After selecting the menu Factory setting the factory setting of the information ted again. After the first display, the symbols are indicated without information display is restored.

  • Page 23: Warning Lights

    If several operational faults of priority 2 exist, the symbols appear one after the  other and are each illuminated for about 5 seconds.  Engine oil » page 25  Warning lights  EPC fault light (petrol engine) » page 26 Overview ...

  • Page 24: Diesel Particle Filter

    Main beam   Fuel reserve » page 30 The indicator light comes on when the main beam or headlight flasher are se-   Downhill Drive Support » page 30 lected » page  WARNING Low beam  If illuminated warning lights and the corresponding descriptions and warn- ■...

  • Page 25: Airbag System

    In order to clean the diesel particulate filter, the vehicle should be driven at an Airbag system  even speed of at least 60 km/h at engine speeds of 1 800 - 2 500 rpm for at least 15 minutes or until the warning light goes out with the 4th or 5th gear engaged Monitoring the airbag system (automatic gearbox: position S) when the traffic situation permits it.

  • Page 26: Electromechanical Power Steering

    If the warning light does not go out after starting the engine or it lights up when Stop the vehicle and switch the engine off if the warning light does not go off driving, a fault exists in an exhaust relevant component. The engine management after the engine has started or flashes while driving.
  • Page 27 WARNING Coolant temperature/coolant level  If you have to stop for technical reasons, then park the vehicle at a safe dis- The warning light comes on for a few seconds when the ignition is switched  tance from the traffic, switch off the engine and activate the hazard warning light system »...
  • Page 28 The ESC cannot be switched off with the button » page 101, Stabilisation Con-  Traction control system (TCS)  trol (ESC); only the TCS system is switched off and the indicator light in the in-  strument cluster lights up. The warning light comes on for a few seconds when the ignition is switched ...
  • Page 29 Note WARNING (Continued) The following guidelines should be observed when opening the bonnet and ■ If the battery has been disconnected, the indicator light illuminates after the  checking the brake fluid level » page 175, Engine compartment. ignition is switched on. The warning light must go out after driving a short dis- If the brake fluid is at the correct level, the ABS control function has failed.

  • Page 30: Open Door

    WARNING Open door  If you have to stop for technical reasons, then park the vehicle at a safe dis- ■ The warning light comes on, if one or several doors are opened. If one of the  tance from the traffic, switch off the engine and activate the hazard warning doors opens while driving, the warning light lights up and an audible signal ...
  • Page 31 CAUTION Temperature of the clutches of the automatic gearbox DSG  If the indicator light (cooling system fault) comes on in addition to the indicator  If the temperature of the clutches for the automatic gearbox DSG is too high, the light on the display when driving, stop immediately and switch the engine off - ...

  • Page 32: Unlocking And Locking

    CAUTION Unlocking and locking Each key contains electronic components; therefore it must be protected ■ against moisture and severe shocks. Vehicle key Keep the groove of the keys completely clean as impurities (textile fibres, dust, ■ etc.) have a negative effect on the functionality of the locking cylinder and igni- tion lock.

  • Page 33: Child Safety Lock

    CAUTION Central locking system Pay attention to the correct polarity when changing the battery. ■ Introductory information The replacement battery must have the same specification as the original bat- ■ tery. When using the central locking and unlocking system, all the doors and the fuel For the sake of the environment filler flap are locked or unlocked at the same time (if it was not set differently in the menu point Settings - Convenience of the information display).

  • Page 34: Safe Securing System

    Automatic locking and unlocking If the safe securing system is not in operation: › All the doors and the boot lid are locked automatically once the car reaches a the indicator light in the driver door flashes rapidly for about 2 seconds, goes speed of about 15 km/h.
  • Page 35 › Turn the key in the locking cylinder of the driver's door in the direction of travel Central locking button (unlock position) » Fig. › Pull the door handle and open the door. Fig. 12 › All the doors (only the driver's door on vehicles with anti-theft alarm system) Centre console: Central locking and the fuel filler flap are unlocked.

  • Page 36: Remote Control

    The transmitter with the battery is housed in the handle of the remote control Note key. The receiver is located in the interior of the vehicle. The operating range of the remote control key is approx. 10 m. But this range of the remote control can If the safe securing system is activated»...

  • Page 37: Anti-Theft Alarm System

    Deactivating the safe securing system Synchronising the remote control › Press the button twice within 2 seconds. Further information » page If the vehicle cannot be unlocked by actuating the remote control system then it Unlocking the luggage compartment door  ›...

  • Page 38: Boot Lid

    When is the alarm triggered? The interior monitor detects movements inside the car and then triggers the alarm. The following security areas of the locked vehicle are monitored: › Bonnet, Switch off the interior monitor and towing protection monitoring › ›...
  • Page 39 Note Boot lid After closing the boot lid, it is automatically locked within 1 second and the ■ anti-theft alarm system is activated. This applies only if the vehicle was locked Fig. 16 before closing the boot lid. Handle of boot lid The function of the hand grip above the licence plate is deactivated when start- ■...

  • Page 40: Electric Power Windows

    Unlocking the boot lid Note › Fold the rear seat backrest forward » page › Insert a screwdriver or similar tool into the opening in the trim in the direction After switching the ignition off, it is still possible to open or close the windows ■...

  • Page 41: Button On The Front Passenger Door And Rear Doors

    › Additionally, the window can be closed automatically (fully closed) by pulling Opening a window › the button to the stop. Renewed pulling of the button causes the window to Lightly press the appropriate button down and hold it until the window has stop immediately.

  • Page 42: Panoramic Sliding Roof

    Panoramic sliding roof Window convenience operation ä First read and observe the introductory information and safety warn- Introductory information ings on page 39. The panoramic sliding roof with sun screen can only be operated with the rotary The electrically powered windows can be opened and closed as follows when un- switch when the ignition is switched on »...
  • Page 43 Tilting and closing Opening › › To tilt, press the switch on the recess in the direction of the roof. Briefly press the button » Fig. 21 to open fully. › › To close, press the switch on the recess down and then push it forwards. Press and hold the button to open in the desired position.
  • Page 44 If the panoramic sliding roof or sun screen is not fully closed when disconnecting Emergency operation and reconnecting the battery, they must first be closed or pushed shut » page 41 » page 42. Only then can the initialisation be completed. ...

  • Page 45: Lights And Visibility

    WARNING Lights and Visibility Never drive with only the side lights on! The side lights are not bright ■ enough to light up the road sufficiently in front of you or to be seen by other Lights oncoming traffic. Therefore always switch on the low beam when it is dark or if visibility is poor.

  • Page 46: Switching Lights On And Off

    Activating the function daylight driving lights Switching lights on and off › Pull the turn signal light lever towards the steering wheel within 3 seconds of switching on the ignition and at the same time, slide it upwards and hold it in this position for at least 3 seconds.

  • Page 47: Cornering Lights

    If the light comes on automatically, the side lights and low beam as well as li- Parking light cence plate light light up at the same time. ä If the automatic driving lamp control is switched on, the light is regulated with First read and observe the introductory information and safety warn- the light sensor in the rear mirror holder.

  • Page 48: Tourist Light

    The COMING HOME/LEAVING HOME function is controlled with the light sensor in You can purchase headlight stickers from the range of the ŠKODA original acces- the mount of the interior rear mirror. If the light intensity is higher than the set sories.

  • Page 49: Rear Fog Light

    The fog lights with the function CORNER are adjusted according to the steering Instrument lighting  angle or after switching on the turn signal light in the following circumstances: › the vehicle is stationary and the engine is running or it moves with a speed of maximum 40 km/h;...

  • Page 50: Headlamp Beam Adjustment

    Headlamp beam adjustment  Switches for the hazard warning light system Fig. 27 Fig. 28 Dash panel: Lights and Visibility Dash panel: Switch for hazard warning lights ä ä First read and observe the introductory information and safety warn- First read and observe the introductory information and safety warn- ings on page 44.

  • Page 51: Turn Signal And Main Beam Lever

    CAUTION Turn signal and main beam lever Only use the main beam or the headlight flasher if other road users will not be Fig. 29 dazzled. Turn signal and main beam lever Note The turn signal system only operates when the ignition is switched on. The cor- ■...

  • Page 52: Interior Light

    If operating lights with the door contact switch is enabled, the light will come on Interior light when: › the vehicle is unlocked, Interior lights at the front › one of the doors is opened, › or the ignition key is removed. If operating lights with the door contact switch is enabled, the light will go off when: ›...

  • Page 53: Visibility

    Switching the interior light off Luggage compartment light › Press the cover glass in the area of the symbol O. The light comes on automatically when the boot lid is opened. If the lid remains Operating the light with the door contact switch ›...

  • Page 54: Windscreen Wipers And Washers

    Note Windscreen wipers and washers If the on-board voltage drops, the windscreen and rear window heater switches ■ ä Introduction off automatically, to provide sufficient electrical energy for the engine con- trol » page 186, Automatic load deactivation. The position and shape of the switch may vary according to the model. This chapter contains information on the following subjects: ■...

  • Page 55: Activating The Windscreen Wipers And Washers

    The windscreen washer nozzles for the windscreen are heated when the en- ■ WARNING gine is running and the outside temperature is less than +10 °C. The content of the windscreen washer fluid reservoir is 3 litres. On vehicles fit- Properly maintained windscreen wiper blades are essential for clear visibility ■...

  • Page 56: Automatic Rear Window Wiper

    Automatic wipe/wash for windscreen Automatic rear window wiper › Pull the lever towards the steering wheel into the spring-tensioned position , the washer system is activated immediately, while the windscreen wipers ä First read and observe the introductory information and safety warn- start wiping a little later.

  • Page 57: Headlight Cleaning System

    Service position for changing wiper blades Headlight cleaning system › Closing the bonnet. › Switch the ignition off and on again. ä First read and observe the introductory information and safety warn- › Then press the windscreen wiper lever into position »...

  • Page 58: Rear Window

    Replacing the rear window wiper blade Automatic dimming interior mirror Fig. 38 Fig. 39 Rear window wiper blade Automatic dimming interior mir- ä First read and observe the introductory information and safety warn- Switching on automatic dimming › ings on page 53. Press the button »...

  • Page 59: Exterior Mirror

    Folding-in both of the exterior mirrors using the remote control key Exterior mirror › If all of the windows are closed, press and hold the lock button » Fig. 14 the radio remote control for approx. 2 seconds. Fig. 40 The exterior mirrors are folded back into the driving position after opening the Inner part of door: Rotary knob door or switching on the ignition.
  • Page 60 Do not touch the surface of the exterior mirrors if the exterior mirror heater is ■ switched on. If the power setting function fails at any time, the exterior mirrors can be set by ■ hand by pressing on the edge of the mirror surface. Contact your specialist garage if there is a fault with the power setting of the ■...

  • Page 61: Seats And Stowage

    WARNING (Continued) Seats and Stowage Never carry more people than the number of seats in the vehicle. ■ Each occupant must correctly fasten the seat belt belonging to the seat. ■ Front seats Children must be fastened » page 150, Transporting children safely with a suitable restraint system.
  • Page 62 Manually adjusting the front seats Foldable front passenger seat Fig. 41 Fig. 42 Control elements at the seat Foldable front passenger seat ä ä First read and observe the introductory information and safety warn- First read and observe the introductory information and safety warn- ings on page 60.
  • Page 63 Adjusting the seat backrest WARNING (Continued) › Press the switch in the direction of the desired setting. If the front passenger seat backrest is folded, passengers may only be con- ■ Reducing or increasing the curvature of the lumbar support veyed on the outer seat behind the driver.
  • Page 64 Storing exterior mirror setting for reversing Note › Switch on the ignition. › Press the required memory button If the remote control key is assigned to a memory button, which has already ■ › Move the rotary knob for the exterior mirror control into position  »...

  • Page 65: Head Restraints

    CAUTION Front seat heating Do not kneel on the seats or otherwise apply pressure at specific points to ■ Fig. 45 avoid damaging the heating elements for the seat heaters. Do not use the seat heaters if the seats are not occupied by persons or if ob- Dash panel: Control for heating ■...
  • Page 66 WARNING Middle rear head restraint The head restraints must be correctly adjusted in order to offer effective ■ Applies to vehicles using the TOP TETHER system. protection for the occupants in the event of an accident. Never drive with the head restraints removed - risk of injury! ■...

  • Page 67: Rear Seats

    WARNING Rear seats Check for yourself that the seat backrest is engaged by pulling on it.  Adjusting seats in forward/back direction Folding the seat backrest forwards and folding the seat fully forwards Fig. 48 Releasing at the front/rear › Pull the lever »...
  • Page 68 WARNING Note Immediately lock the folded forward seat with the aid of the fixing belt to a The outer seats are not mutually interchangeable. In the rear area the left seat is ■ guide rod of the head restraint for the front seat - risk of injury. marked with the letter L and the right seat with the letter R.

  • Page 69: Luggage Compartment

    › › Fold the seat in the horizontal position until it can be heard to click. Check for Place heavy objects as far forward as possible. › yourself that the seat can no longer be lifted by pulling it up. Attach the items of luggage to the lashing eyes or using the fixing ›...

  • Page 70: Fastening Elements

    WARNING (Continued) Fastening elements If the rear seat next to the folded forward seat is occupied, ensure maxi- ■ mum safety, e.g. by placing the goods to be transported in such a way that the seat is prevented from folding back in case of a rear collision. Never drive with the boot lid fully opened or slightly ajar otherwise exhaust ■...
  • Page 71 A fastening strip is located on both sides of the luggage compartment with two Folding hooks moveable hooks each, in order to attach small items of luggage, such as bags etc. » Fig. Fig. 55 Move the hook into another position Luggage compartment: folding ›...

  • Page 72: Net Partition

    WARNING WARNING The permissible load of the side nets is 1.5 kg. Heavy objects are not secured No objects should be placed on the luggage compartment cover, the vehicle sufficiently - risk of injury and net damage! occupants could be endangered if there is sudden braking or the vehicle col- lides with something.

  • Page 73: Variable Loading Floor In The Luggage Compartment

    › First of all insert the cross rod into the mount » Fig. 59 on one side and push Note it forward. In the same way, insert the cross rod into the mount on the other side of the vehicle. The room under the variable loading floor can be used to stow objects.

  • Page 74: Variable Loading Floor With Spare Wheel

    Variable loading floor with spare wheel Removing and installing carrier rails Use variable loading floor Fig. 61 Slacken check points/remove carrier rails Remove carrier rails › Fig. 62 Fold the side parts of the loading floor/example for using the varia- Slacken the check points »...

  • Page 75: Roof Rack System

    The storage box is housed under the variable loading floor. This can be re- CAUTION moved where necessary. Only use roof rack systems approved by ŠKODA. ■ There is a storage space for the vehicle tool kit under the storage If other roof rack systems are used or if the roof bars are not fitted correctly, ■...

  • Page 76: Ashtray

    Ashtray Cup holder in front centre console Front ashtray Fig. 64 Front centre console: Cup holder Fig. 66 Centre console: Front ashtray ä First read and observe the introductory information and safety warn- ings on page 74. Removing ashtray Two beverage containers can be placed into the recesses »...

  • Page 77: Cigarette Lighter, 12-Volt Power Socket

    Opening ashtray WARNING › Grasp the ashtray cover at the lower edge and fold it open in the direction of arrow » Fig. Never place flammable objects in the ashtray - risk of fire! Removing ashtray › Grasp the ashtray at the handle and remove from above.

  • Page 78: Storage Compartments

    WARNING WARNING Take care when using the cigarette lighter! Improper use of the cigarette Improper use of the 12-volt power socket and the electrical accessories can ■ ■ lighter can cause burns. cause fires, burns and other serious injuries. The cigarette lighter also operates when the ignition is switched off or the Never leave children unattended in the vehicle.
  • Page 79 Folding table on the front seat rest » page 81 Cooling the storage compartment on the front passenger side Folding table on the medium seat rest » page 81 Stowage compartment in rear centre console » page 82 Fig. 72 Storage compartments in the luggage compartment »...
  • Page 80 WARNING Glasses storage box The storage compartment is not a substitute for the ashtray and must also ■ not be used for such purposes - risk of fire! Fig. 75 The storage compartment must always be closed when driving for safety Detail of the headliner: Glasses ■...
  • Page 81 WARNING Front armrest with storage compartment Use the area » Fig. 76 of the storage compartment only for storing objects which do not project so that the effectiveness of the side airbag is not im- paired.  Stowage compartment below front passenger seat Fig.
  • Page 82 The air inlet in the storage compartment is connected to position  through ad- CAUTION justment of the control dial for air distribution. This setting causes the maximum amount of air to flow into the storage compartment (depending on the rotary reg- The folding table on the seat backrest of the front passenger seats is designed to ulator position for the fan).

  • Page 83: Flexible Storage Compartment

    The cover for the side compartment » Fig. 82can be removed, thus enlarging Stowage compartment in rear centre console the luggage compartment. › Grasp the top part of the cover and carefully remove it in the direction of the arrow »...

  • Page 84: Through-Loading Bag

    Note Through-loading bag The removable through-loading bag is foreseen for two pairs of skis. ■ The removable through-loading bag is solely used for transporting skis. Place the skis and sticks in the removable through-loading bag with the tips ■ facing to the rear. Fig.

  • Page 85: Parking Ticket Holder

    Parking ticket holder Fig. 85 Windshield: Parking ticket hold- The note holder is designed e.g. for attaching a car park ticket in parking areas. WARNING The attached note has to always be removed before starting off in order not to restrict the driver's vision. ...

  • Page 86: Heating And Air Conditioning System

    Note Heating and air conditioning system The used air streams out through the air removal openings in the luggage com- ■ partment. Introductory information We recommend that you do not smoke in the vehicle when the recirculating air ■ mode is operating since the smoke which is drawn at the evaporator from the in- terior of the vehicle forms deposits in the evaporator of the air conditioning sys- Description and information tem.

  • Page 87: Air Outlet Vents

    If you cannot rectify the functional fault yourself, or the cooling capacity decrea- Open the air outlet vents 6 › ses, the cooling system must be switched off. Visit a specialist garage. Turn the vertical wheel (between the settings) » Fig. ...

  • Page 88: Heating

    › Turn the blower switch into position 0 to switch the blower off. Heating › If you wish to shut off the fresh air supply, use the button » page 88, section Recirculated air mode. Using the system Regulating the air distribution ›...

  • Page 89: Air Conditioning System (Manual Air Conditioning System)

    Setting of the control dial Set-up Button Air outlet vents 4 To the right up to the  The fastest heating Briefly switch on Opening stop    Comfortable heating Desired temperature 2 or 3 Do not switch on Opening To the left up to the ...
  • Page 90 Auxiliary heating (parking heating) Using the system › Press the button to directly switch on/off the auxiliary heating (auxiliary  heating and ventilation). Further information » page 93, Auxiliary heating (auxiliary heating and ventilation). Note The whole heat output will be needed to defrost the windshield and side win- ■...
  • Page 91 Setting the air conditioning system Recommended basic settings of the control elements of the air conditioning sys- tem for the respective operating modes: Setting of the control dial Button Set-up Air outlet vents 4 Defrost windscreen and side Desired tempera- Automatically Open and align with the side ...

  • Page 92: Climatronic (Automatic Air Conditioning System)

    Climatronic (automatic air conditioning system) Overview of the control elements Description The Climatronic maintains fully automatically a convenience temperature. This is achieved by automatically varying the temperature of the air flow, the blower stages and air distribution. The system also takes sunlight into account, which eliminates the need to alter the settings manually.

  • Page 93: Setting Temperature

    Note Setting temperature Below the top row of buttons is located the interior temperature sensor. Do not The interior temperature for the left and right side can be set separately. stick anything on or cover the sensor, otherwise it could have an unfavourable ef- ›...

  • Page 94: Auxiliary Heating (Auxiliary Heating And Ventilation)

    Switch on automatic air distribution control WARNING › Repeatedly press the button until the indicator light on the right side of  the button is illuminated. “Stale air” may result in fatigue in the driver and occupants, reduce attention ■ levels and also cause the windows to mist up.
  • Page 95 The auxiliary heating (parking heating) warms up the coolant by combusting fuel The auxiliary heating (parking heating) does not switch on, if the following was ■ from the vehicle tank. The coolant warms up the air, which (if the blower speed is shown in the information display or before switching off the ignition: Please re- not set to zero) flows into the passenger compartment.

  • Page 96: System Settings

    Only one programmed pre-set time can be active. System settings The last programmed pre-set time remains active. ä First read and observe the introductory information and safety warn- After the auxiliary heating activates at the set time, it is necessary to pre-set a ings on page 93.
  • Page 97 If the battery is properly charged, the effective range is up to 600 m. To switch Changing the battery of the radio remote control on/off the auxiliary heating, hold the radio remote control vertically with the an- tenna » Fig. 92 facing upwards.

  • Page 98: Starting-Off And Driving

    WARNING (Continued) Starting-off and Driving Only pull the ignition key from the ignition lock when the vehicle has come ■ to a complete stop (by applying the handbrake). Otherwise the steering wheel Starting and stopping the engine could block - risk of accident! When leaving the vehicle, the ignition must always be removed.

  • Page 99: Electromechanical Power Steering

    Note Electromechanical power steering The engine can only be started with a genuine ŠKODA key with the matching ä ■ First read and observe the introductory information and safety warn- code. ings on page 97. The engine running noises may louder at first be louder for a short time after ■...

  • Page 100: Ignition Lock

    Vehicles with a diesel engine are equipped with a glow plug system. The pre- Ignition lock glow indicator light comes on after the ignition has been switched on. The en-  gine should be started immediately after the preglow indicator light goes out. Fig.

  • Page 101: Brakes And Brake Assist Systems

    CAUTION Brakes and brake assist systems Observe the information on the new brake pads » page 153. ■ ä Introduction Never let the brakes slip with light pressure on the pedal if braking is not neces- ■ sary. This causes the brakes to overheat and can also result in a longer braking This chapter contains information on the following subjects: distance and excessive wear.
  • Page 102 Wet roads or road salt Releasing the handbrake › The performance of the brakes can be delayed as the brake discs and brake pads Pull the handbrake lever up slightly and at the same time push in the locking may be moist or have a coating of ice or layer of salt on them in winter. The button »...
  • Page 103 The ESC cannot be switched off, the button » Fig. 96 only deactivates the TCS The uphill start assist is active as of a 5 % slope, if the driver door is closed. It is  system and the indicator light in the instrument cluster lights up.

  • Page 104: Off Road Mode

    The system operates when starting off or at low speeds.  Traction control system (TCS) Electronic differential lock (EDL) Fig. 97 TCS button ä First read and observe the introductory information and safety warn- ings on page 100. If one of the wheels starts to spin, the EDL system brakes the spinning wheel and transfers the driving force to the other wheels.
  • Page 105 The following functions are integrated in the OFF ROAD mode: first time. When the Assist System actively intervenes, this is indicated by the › Start-Off Assist, warning light flashing or by a pulsating movement of the brake pedal, similar to ›...

  • Page 106: Shifting (Manual Gearbox)

    Vehicles with automatic gearbox: Always depress the clutch pedal fully when changing gear, to prevent excessive › Selector lever in the position D, S or Tiptronic (for the 1st, 2nd, 3rd gear) for driv- wear of the clutch. ing forwards - approx. 2 - 30 km/h The following must also be observed when changing gear »...

  • Page 107: Parking Aid

    Activating/deactivating the rear parking aid Parking aid The parking aid is activated automatically when reverse gear is engaged and the ignition is turned on. This is confirmed by a brief audible signal. The parking aid is deactivated by removing the reverse gear. Activating/deactivating the front and rear parking aid The parking aid is activated when the ignition is turned on and reverse gear is en- gaged and or by pressing the button...

  • Page 108: Park Assist

    CAUTION Park assist If other vehicles are parked behind or on the kerb, the park assist guides your ■ ä Introduction vehicle beyond the kerb or onto it. Ensure that the wheels or the wheel rims of your vehicle are not damaged and if necessary intervene in time. This chapter contains information on the following subjects: Under certain circumstances, surfaces or structures of certain objects, such as ■...
  • Page 109 Park assist display on the information display Parking with the help of the park assist system and completing the parking procedure Fig. 101 Switch on display of the park assist in the information display/infor- mation display: Finding a suitable parking space Fig.
  • Page 110 › As soon as the following message is shown in the information display: Steering Park Assist finished. intervent. active. Check area around veh.! , let go of the steering wheel and the The parking procedure has ended or after switching on the ignition, the vehicle steering is taken over by the system.

  • Page 111: Cruise Control System (Ccs)

    Speed too high! Please take over steering! WARNING The parking procedure was ended because the speed was exceeded. For safety reasons, the cruise control system must not be used in dense ■ Park Assist: ASR intervention. traffic or on unfavourable road surfaces (such as icy roads, slippery roads, The intervention of the TCS while searching for a suitable parking place.
  • Page 112 Decreasing the speed Storing a speed › The stored speed can be reduced by pressing the rocker button into the po- sition SET. › The speed will decrease continuously, if the rocker button is pressed and held Fig. 104 in the SET position. Release the rocker button once the desired speed is Turn signal and main beam lev- reached.

  • Page 113: Start/Stop

    Conditions for the automatic engine shut down (stop phase) START/STOP › The gearshift lever is in Neutral. › The clutch pedal is not depressed. › The driver has fastened the seat belt. Fig. 105 › The driver's door is closed. Button for the START-STOP sys- ›...
  • Page 114 Messages in the instrument cluster display (valid for vehicles without Information display) ERROR START STOP Error in the START-STOP system START STOP NOT POSSIBLE Automatic engine shut down is not possible. START STOP ACTIVE Automatic engine shut down (stop phase) SWITCH OFF IGNITION Switch off the ignition.

  • Page 115: Automatic Gearbox

    WARNING (Continued) Automatic gearbox If you have to stop on a slope, depress and hold the brake pedal to prevent ■ the vehicle from rolling back. Automatic gearbox On a smooth or slippery road surface using the kickdown function can cause ■...

  • Page 116: Starting-Off And Driving

    If the selector lever position N is accidentally selected while driving, it is first nec- Selector lever positions essary to release pressure on the accelerator pedal and wait for the idling speed of the engine to be reached before the selector lever can be engaged in the drive position.

  • Page 117: Manual Shifting Of Gears (Tiptronic)

    The brake pedal must be depressed to move the selector lever out of the position Tiptronic mode makes it possible to manually shift gears on the selector lever. N (if the lever is in this position for longer than 2 seconds) into the position D or R Switching to manual shifting when the vehicle is travelling at less than 5 km/h or the vehicle is stationary and ›...

  • Page 118: Kickdown Function

    Shiftlock button When adopting a sporty style of driving with rapid movements of the accelerator The Shiftlock button in the handle of selector lever prevents certain selector lever pedal combined with sharp acceleration, frequent changes in speed and exploit- positions being engaged inadvertently. The selector lever lock is cancelled when ing the top speed of the car, the gearbox will adjust to this style of driving once the Shiftlock button is pressed.

  • Page 119: Selector Lever-Emergency Unlocking

    Selector lever-emergency unlocking Fig. 108 Selector lever-emergency un- locking ä First read and observe the introductory information and safety warn- ings on page 114. In case of interruption of the power supply (e.g. flat vehicle battery, defective fuse) or defect of the selector lever lock, the selector lever can no longer be shif- ted from the position P in the normal way and the vehicle can no longer be moved.

  • Page 120: Communication

    WARNING (Continued) Communication If a mobile phone or a two-way radio system is operated in a vehicle without ■ an external aerial or an external aerial which has been installed incorrectly, Mobile phones and two-way radio systems this can increase the strength of the electromagnetic field inside the vehicle. Two-way radio systems, mobile phones or mounts must not be installed on ■...

  • Page 121: Operating The Phone On The Multifunction Steering Wheel

    Operating the phone on the multifunction steering wheel The driver can set the basic functions of the telephone by simply operating the buttons located on the steering wheel so that he can concentrate on the traffic situation without being distracted as little as possible by operating the tele- phone »...

  • Page 122: Symbols In The Information Display

    Symbols in the information display Symbol Importance Valid for Charge status of the phone battery GSM II, GSM III  Signal strength GSM II, GSM III  a phone is connected to the hands-free system. GSM II, GSM III when connected via the HFP profile ...
  • Page 123 › Managing telephone calls via the adapter » page 123. During the connecting procedure, no other mobile phone may be connected with › Operation of the telephone via the information display » page 124. the hands-free system. › Voice control of the telephone »...
  • Page 124 Note CAUTION If a suitable adapter is available for your mobile phone, only use your mobile Taking the mobile phone out of the adapter during the call can lead to interrup- ■ phone in the adapter inserted in the telephone mount so that the radiation in the tion of the connection.

  • Page 125: Universal Telephone Preinstallation Gsm Iil

    Search ■ Phone book ■ Phone name - the possibility to change the name of the telephone unit (pre-set ■ ■ Dial number SKODA UHV) Call register ■ Settings Voice mailbox ■ ■ Bluetooth The following menu points can be selected in the menu Settings: Settings ■...
  • Page 126 › All communication between a telephone and the hands-free system of your vehi- If your SIM card is blocked by a PIN code, enter the PIN code for the SIM card in ® cle can only be established with the help of the following profiles of Bluetooth your phone.
  • Page 127 Dial number Note Any telephone number can be entered in the menu point Dial number. The re- quired numbers must be selected one after the other using adjustment wheel In the memory of the control unit, up to three users can be stored, whereby the ■...

  • Page 128: Internet Connection

    Phone name - the possibility to change the name of the hands-free system Data - Settings for the Internet access point - ask network operator for details ■ ■ (pre-set SKODA UHV) Switch off ph. (Switch off ph.) - switches off the phone unit (phone remains ■ coupled)

  • Page 129: Voice Control

    › ® Use the device that is to be connected to search for available Bluetooth devi- The digits 0 - 9, symbols +, , # are permitted. The system detects no continuous ces. digit combinations such as twenty-three, but only individually spoken digits (two, ›...
  • Page 130 Voice commands - GSM II Voice commands - GSM III Basic voice commands Basic voice commands Voice command Action Voice command Action After this command the system repeats all possible After this command the system repeats all possible HELP HELP commands.

  • Page 131: Multimedia

    The music playback process is performed on the connected device. Multimedia The universal telephone preinstallation GSM II ensures that the music played back via the hands-free system can be controlled with the remote control » page 129, ® Music playback via Bluetooth Voice commands - GSM II.
  • Page 132 Button Action Radio, traffic information CD/CD changer/MP3 Navigation Changing to the previously stored radio station Press briefly Changing to the previously stored traffic information Changing to the previous title Interrupting the traffic report Press button for a Interruption of the traffic report Fast rewind long period of time Press briefly...
  • Page 133 Filling the CD changer with CDs DVD-preinstallation › Press and hold the button for longer than 2 seconds and guide the CDs one after the other (maximum 6 CDs) into the CD case . The indicator lights in the buttons stop flashing.

  • Page 134: Safety

    › belt tensioners for front seats; Safety › seat belt height adjusters for front seats; › Front airbag for the driver and the front seat passenger; › driver’s knee airbag; › Passive Safety front side airbags; › rear side airbags; ›...

  • Page 135: Correct Seated Position

    WARNING (Continued) What influences the driving safety? If the occupant adopts an incorrect seated position, he is exposed to life- ■ ä First read and observe the introductory information and safety warn- threatening injuries, in case he is hit by a deployed airbag. ings on page 133.
  • Page 136 For the safety of the front passenger and to reduce the risk of injury in the event Correct seated position for the driver of an accident, we recommend the following setting. › Position the front passenger seat back as far as possible. The front passenger must maintain a distance of at least 25 cm to the dash panel so that the airbag offers the greatest possible safety if it is deployed.
  • Page 137 Examples of an incorrect seated position ä First read and observe the introductory information and safety warn- ings on page 134. Seat belts offer their optimum protection only if the webbing of the seat belts is properly routed. Incorrect seated positions considerably reduce the protective functions of the seat belts and therefore increase the risk of injury due to an in- correct routing of the seat belt.

  • Page 138: Seat Belts

    Particular safety aspects must be observed when transporting children in the ve- Seat belts hicle » page 150, Transporting children safely. WARNING Seat belts Fasten your seat belt before each journey - even when driving in town! This ■ also applies to the people seated at the rear - risk of injury! ä...

  • Page 139: The Physical Principle Of A Frontal Collision

    Motion energy, so-called kinetic energy, is produced as soon as the vehicle is WARNING (Continued) moving, both for the vehicle and its occupants. The magnitude of this kinetic en- The seat belts for the rear seats can only fulfil their function reliably when ergy depends essentially on the speed at which the vehicle is travelling and on ■...

  • Page 140: Fastening And Unfastening Seat Belts

    A plastic knob in the belt webbing holds the belt tongue in a position which is Fastening and unfastening seat belts easy to get hold of. Fasten your seat belt before starting! It is important that the belt webbing is properly routed to ensure seat belts offer the maximum protection.

  • Page 141: Seat Belt Height Adjuster On The Front Seats

    The belt tongues for the rear middle seat are shaped differently so that they only Seat belt height adjuster on the front seats fit into the correct belt buckle. If you are not able to insert a lock tongue into the wrong belt lock you probably tried to put it into the wrong buckle.

  • Page 142: Seat Belts

    WARNING Any work on the belt tensioner system including removal and installation of ■ system components because of other repair work, must only be carried out by a specialist garage. The protective function of the system is only adequate for a single accident. ■...

  • Page 143: Airbag System

    WARNING Airbag system The airbag is not a substitute for the seat belt, but instead forms part of the ■ complete passive vehicle safety concept. Please note that an airbag can only Description of the airbag system offer you optimal protection in combination with a seat belt which is fas- tened.

  • Page 144: Front Airbags

    Deployment factors Front airbags It is not possible to generally determine which deployment conditions apply to the airbag system in every situation. An important role is played by factors such as the type of object that the vehicle hits (hard, soft), the impact angle, vehicle ä...

  • Page 145: Driver's Knee Airbag

    WARNING (Continued) Note this is not done, there is a risk of the child suffering severe or even fatal inju- The dash panel must be replaced after the front passenger airbag has been de- ries if the front passenger airbag is deployed. When transporting a child on ployed.

  • Page 146: Side Airbags

    In the event of a severe frontal collision, the driver's knee airbag and the belt ten- WARNING sioner are deployed. Adjust the driver's seat in a forward/back direction so that there is a gap of ■ The forward movement of the body is cushioned when it makes contact with the at least 10 cm between the legs and the dash panel in the vicinity of the knee fully inflated airbag and the risk of injury to the legs of the driver is thus reduced.
  • Page 147 WARNING (Continued) Description of the side airbags In the event of a side collision, the side airbags will not function properly, if ■ the sensors cannot measure the increasing air pressure inside the doors, be- Fig. 125 cause the air can escape through large, non-sealed openings in the door pan- Installation position of side air- bag in driver seat Never drive with removed inner door panels.

  • Page 148: Head Airbags

    WARNING Function of the side airbags There must not be any objects in the deployment area of the head airbags ■ Fig. 126 which might prevent the airbags from inflating properly. Only hang light items of clothing on the hooks fitted in the vehicle. Never Inflated side airbags ■...

  • Page 149: Deactivating Airbags

    When deployed, the airbags cover the entire area of the side window and door Description of the head airbags pillar » Fig. 128. Any impact of the head against parts of the interior or objects outside of the car, Fig. 127 is cushioned by the inflated head airbag.
  • Page 150 › The following applies if the airbag has been switched off using the key switch Check whether the yellow airbag indicator light in the display     in the storage compartment: in the middle of the dash panel lights up when the ignition is turned ...

  • Page 151: Transporting Children Safely

    WARNING (Continued) Transporting children safely Under no circumstances allow children to be transported without the use of ■ a suitable restraint system. In the event of an accident the child will be Child seat thrown through the vehicle and may as a result suffer fatal injuries, and also injure other occupants.

  • Page 152: Use Of Child Safety Seats

    › Set the height-adjustable front passenger seat as high up as possible. WARNING › Adjust the seat belt for the front passenger seat so that it is as high as possible (not suitable for a child seat fastened with the ISOFIX system). Children must never be seated with their head in the deployment area of ■...
  • Page 153 Universal category - the seat is suitable for all approved types of child safety Child seat with the TOP TETHER system seats. The seat can be fitted with fixing eyes for the ISOFIXsystem. Fig. 132 The rear seats can be fitted with fixing eyes for the TOP TETHER system. ...

  • Page 154: Driving Tips

    CAUTION Driving Tips All the speed and engine revolution figures apply only when the engine is at its normal operating temperature. Never rev up a cold engine when the vehicle is Driving and the Environment stationary or when driving in individual gears. For the sake of the environment The first 1 500 kilometres and then afterwards Not driving at unnecessarily high engine revolutions and shifting to a higher gear...

  • Page 155: Economical And Environmentally Friendly Driving

    The optimal engine speed should be obtained when accelerating, in order to WARNING avoid a high fuel consumption and resonance of the vehicle.  In view of the high temperatures which can be produced in the catalytic con- ■ verter, the vehicle should be parked in such a way that the catalytic converter Looking ahead when driving cannot come into contact with easily flammable materials under the vehicle - risk of fire!
  • Page 156 If an engine is only idling it takes much longer for it to reach its normal operating Note temperature. Wear-and-tear and pollutant emissions, though, are particularly high in the warming-up phase. Therefore, start driving as soon as the engine has Observe the recommended gear »...

  • Page 157: Environmental Compatibility

    It is particularly in town traffic, when one is accelerating quite often, that the ve- Avoid short distances hicle weight will have a significant effect upon the fuel consumption. A rule of thumb here is that an increase in weight of 100 kilograms will cause an increase in fuel consumption of about 1 litre/100 kilometres.

  • Page 158: Driving Abroad

    › The use of solvent-free adhesives. Headlights › No CFCs used in the production process. › Without use of mercury. The low beam of your headlights is set asymmetrically. It illuminates the side of › Use of water-soluble paints. the road on which the vehicle is being driven to a greater extent. Trade-in and recycling of old cars When driving in countries in which the traffic drives on the other side of the road ŠKODA meets the requirements of the brand and its products with regard to pro-...

  • Page 159: Driving Through Water On The Street

    Potholes, mud or rocks can be hidden under the water making it difficult or im- ■ Driving through water on the street possible to drive through the body of water. Do not drive through salt water. The salt can lead to corrosion. Any vehicle parts ■...

  • Page 160: Explanation Of Technical Terms

    WARNING For the sake of the environment Be very alert and look ahead when driving off-road. Always adjust your driv- Pay attention to the environment when driving off-road. ■  ing to the current of-road, traffic and weather conditions. Excessive speed or incorrect driving manoeuvres can cause damage to the vehicle and lead to se- Explanation of technical terms rious injuries.

  • Page 161: Before Driving Off-Road

    Embankment angle (front and rear) Before driving off-road Transition from the horizontal plane to an upward slope or from a downward slope back to the plane. The angle indication determines the angle at which you ä First read and observe the introductory information and safety warn- can drive the vehicle down the embankment, at a slow speed, without the bump- ings on page 158.

  • Page 162: Off-Road Driving

    Driving over rutted roads and troughs Off-road driving › Only drive over rutted roads and troughs when they do not exceed your vehi- cle's ground clearance. Your vehicle may “sink” and get stuck in soft ground. ä First read and observe the introductory information and safety warn- ›...

  • Page 163: Driving At An Angle On A Hillside

    Manual gearbox If the vehicle is at a very steep angle, the wheels on the low side must not sink › If you are driving through difficult terrain, on no account use the clutch or deeply into the ground or into troughs and you must not drive over stones, tree change the gear.

  • Page 164: After Driving Off-Road

    Rocking out vehicle › Switch off the TCS. › Set the steering wheel straight. › Drive back until the wheels just begin to spin. › Shift into first gear and drive forwards until the wheels just begin to spin again. ›...

  • Page 165: Towing A Trailer

    Tyre pressure Towing a trailer Correct the tyre inflation pressure on your vehicle for a “full load” » page 188, Service life of tyres. Trailer load Towing a trailer The permissible trailer load must not be exceeded under any circumstan- »...
  • Page 166 Immediately reduce your speed as soon as even the slightest swaying of the trail- Engine overheating er is detected. Never attempt to stop the trailer from “swaying” by accelerating. If the needle for the coolant temperature gauge moves into the right-hand area or the red area of the scale, the speed must be reduced immediately.

  • Page 167: General Maintenance

    WARNING General Maintenance Care products may be harmful to your health if not used according to the in- ■ structions. Taking care of and cleaning the vehicle Always store care products in a safe place, out of the reach of children - risk ■...

  • Page 168: Washing By Hand

    If your vehicle is fitted with any particular attached parts, such as a spoiler, roof Note luggage rack, two-way radio aerial - it is best to consult the operator of the car wash system beforehand. Remove fresh stains such as those from ball-point pens, ink, lipstick, shoe pol- ■...
  • Page 169 First clean the chrome parts with a damp cloth and then polish them with a soft, CAUTION dry cloth. If this method does not completely clean chrome parts, use a specific chrome care product. The temperature of the water used for cleaning must not exceed 60 °C - risk of damaging the vehicle.

  • Page 170: Headlight Lenses

    Use soap and clean water to clean the plastic headlight lenses. De-icing windows and exterior mirrors CAUTION ä First read and observe the introductory information and safety warn- ings on page 166. Never wipe the headlights dry and do not use any sharp objects to clean the ■...

  • Page 171: Underbody Protection

    As damage to the protective layer when driving cannot be ruled out completely, Wheels we recommend that you inspect and touch up any damaged areas of the protec- tive layer on the underside of your vehicle and on the chassis at certain intervals - ä...

  • Page 172: Natural Leather

    Dry off the leather with a soft, dry cloth. Artificial leather and materials Removing stains ä First read and observe the introductory information and safety warn- Remove fresh stains which are water-based (e.g. coffee, tea, juices, blood, etc.) ings on page 166. with an absorbent cloth or household paper or use a suitable cleaner for a stain which has already dried in.
  • Page 173 Seat belts ä First read and observe the introductory information and safety warn- ings on page 166. Keep the seat belts clean! Clean dirty seat belts using a mild soapy solution and remove coarse dirt with a soft brush! Check the condition of all the seat belts on a regular basis. Belt webbing which has become severely soiled may prevent the inertia reel from reeling up the belt properly.

  • Page 174: Inspecting And Replenishing

    Refuelling Inspecting and replenishing Fuel ä Introduction This chapter contains information on the following subjects: Refuelling Unleaded petrol Diesel fuel Fig. 140 Right rear side of the vehicle: Open fuel filler flap/fuel filler flap The correct type of fuel for your vehicle and the tyre size and inflation pressure with cap unscrewed are specified on the inside of the fuel filler flap »...
  • Page 175 Prescribed fuel - unleaded petrol 98/95 RON Unleaded petrol Use unleaded fuel with the octane rating 98 RON. Unleaded petrol 95 RON can also be used but results in a slight loss in performance. ä First read and observe the introductory information and safety warn- ings on page 173.

  • Page 176: Engine Compartment

    Engine compartment Diesel fuel ä First read and observe the introductory information and safety warn- ä Introduction ings on page 173. This chapter contains information on the following subjects: Your vehicle can only be operated with diesel fuel, which complies with the standard EN 590 (standard DIN 51628 in Germany, standard ÖNORM C 1590 in Opening and closing the bonnet Austria, GOST R 52368-2005/EN 590:2004 in Russia).
  • Page 177 WARNING (Continued) For the sake of the environment Firmly apply the handbrake. ■ In view of the environmentally friendly disposal of fluids, the specials tools and Allow the engine to cool. ■ knowledge required for such work, we recommend that fluids are changed by a Keep children clear of the engine compartment.

  • Page 178: Engine Compartment Overview

    Closing the bonnet Opening and closing the bonnet › Lift the bonnet slightly and unhook the bonnet support. Press the bonnet sup- port into the holder designed to hold it. › Let the bonnet drop into the lock carrier lock from a height of around 20 cm – do not push it in! ›...

  • Page 179: Checking The Engine Oil Level

    One should therefore check the oil level at regular intervals, preferably every time Checking the engine oil level after the fuel tank is filled or after driving for long stretches. We recommend maintaining the oil level within the range , but not above, if Fig.

  • Page 180: Changing Engine Oil

    Coolant capacity Changing engine oil Petrol engines Capacities (in litres) ä First read and observe the introductory information and safety warn- 1.2 ltr./77 kW TSI ings on page 175. 1.4 ltr./90 kW TSI 1.8 ltr./112 kW TSI The engine oil must be changed at the intervals stated in the Service schedule or according to the service interval indicator »...

  • Page 181: Checking The Coolant Level

    Checking the coolant level Replenishing the coolant ä First read and observe the introductory information and safety warn- Fig. 145 ings on page 175. Engine compartment: Coolant › expansion reservoir Switch off the engine. › Allow the engine to cool. ›...

  • Page 182: Radiator Fan

    WARNING Radiator fan If the fluid level has dropped below the MIN marking, do not continue your ä First read and observe the introductory information and safety warn- journey - risk of accident! Get professional assistance.  ings on page 175. The radiator fan is driven by an electric motor and controlled according to the coolant temperature.

  • Page 183: Vehicle Battery

    Note Windshield washer system Do not remove the filter from the windshield washer fluid reservoir when replen- Fig. 147 ishing it with liquid otherwise the liquid transportation system can be contamina- ted, which can cause the windshield washer system to malfunction. Engine compartment: Wind- ...
  • Page 184 WARNING CAUTION The battery acid is strongly corrosive and must, therefore, be handled with The vehicle battery must only be disconnected if the ignition is switched off, ■ ■ the greatest of care. Always wear protective gloves, eye and skin protection otherwise the vehicle's electrical system (electronic components) can be dam- when handling the vehicle battery.

  • Page 185: Battery Cover

    ä First read and observe the introductory information and safety warn- Battery cover ings on page 182. We recommend that the electrolyte level is checked by a specialist garage on a regular basis, especially in the following cases: › High outside temperatures. ›...

  • Page 186: Charging A Vehicle Battery

    Charging a vehicle battery Disconnecting and reconnecting the vehicle battery ä ä First read and observe the introductory information and safety warn- First read and observe the introductory information and safety warn- ings on page 182. ings on page 182. A properly charged vehicle battery is essential for reliably starting the engine.

  • Page 187: Automatic Load Deactivation

    Automatic load deactivation ä First read and observe the introductory information and safety warn- ings on page 182. An intelligent vehicle power management system automatically takes various measures at high loads on the vehicle battery to prevent discharging of the bat- tery: This manifests itself by the following: ›...

  • Page 188: Wheels And Tyres

    WARNING (Continued) Wheels and Tyres Do not, where possible, replace individual tyres but at least replace them on ■ both wheels of a given axle at the same time. Always fit the tyres with the Wheels deeper tread depth to the front wheels. Never use tyres if you do not know anything about the condition and age.

  • Page 189: Service Life Of Tyres

    Driving style Service life of tyres Fast cornering, sharp acceleration and braking increase the wear of your tyres. Balancing wheels The wheels of a new vehicle are balanced. There are a wide range of influences when driving which may result in an imbalance and which makes themselves felt through vibration in the steering.

  • Page 190: Handling Wheels And Tyres

    Proper knowledge of the tyre data makes it easier for you to select the correct Handling wheels and tyres type of tyre. Tyres, for example, have the following inscription on their walls: 225/50R 17 91 T Fig. 151 What this means is: Changing wheels around Tyre width in mm Height/width ratio in %...

  • Page 191: Unidirectional Tyres

    Replace it with a wheel having the appropriate mode and dimensions as soon as Unidirectional tyres possible ä First read and observe the introductory information and safety warn- Temporary spare wheel ings on page 187. A warning label is displayed on the wheel rim of the spare wheel to indicate that your vehicle is equipped with a temporary spare wheel.

  • Page 192: Wheel Bolts

    Install Wheel trim caps › First press the full wheel trim onto the wheel rim at the valve opening provided. Then press the full wheel trim into the wheel rim until its entire circumference locks correctly in place. Fig. 154 Pull off the wheel trim cap on CAUTION light alloy wheels...

  • Page 193: Wheel Bolts

    The rolling circumference of the tyre can change if: Note › the tyre inflation pressure is too low; › the structure of the tyre is damaged; The tyre control display does therefore not replace the regular tyre inflation ■ › the vehicle is loaded on one side;...

  • Page 194: Snow Chains

    The use of snow chains is only technically permissible on the rear axle for the fol- For the sake of the environment lowing standard wheel/tyre combinations: Fit the summer tyres on again in good time as they provide better handling prop- Wheel size Depth (D) Tyre size...

  • Page 195: Accessories, Changes And Replacement Of Parts

    WARNING Accessories, changes and replacement of Work or modifications on your vehicle, which have been carried out unpro- ■ parts fessionally, can cause operational faults - risk of accident! We advise you, in your own interest, to only use ŠKODA Original Accessories ■...

  • Page 196: Do-It-Yourself

    Fire extinguisher Do-it-yourself The fire extinguisher is attached with straps in a holder under the driver seat. Do-it-yourself Please read carefully the instructions which are attached to the fire extinguish- The fire extinguisher must be checked by an authorised person on an annual ba- Stowage space for first-aid kit and warning triangle sis (the national legal provisions must be observed).

  • Page 197: Changing A Wheel

    The vehicle tool kit and the lifting jack, on which a sign is affixed, are stowed in a WARNING box in the luggage compartment » Fig. 157; there is also space here for the de- tachable ball head of the towing device. The box is secured with a strap. The If you are in flowing traffic, switch on the hazard warning light system and ■...
  • Page 198 Note Preliminary work All bolts must be clean and must turn easily. ■ ä First read and observe the introductory information and safety warn- Under no circumstances grease or oil the wheel bolts! ■ ings on page 196. When fitting unidirectional tyres, ensure that the direction of rotation is cor- ■...
  • Page 199 Slackening and tightening wheel bolts Raising the vehicle Fig. 158 Fig. 159 Changing a wheel: Slackening Changing a wheel: Jacking points wheel bolts for positioning lifting jack ä First read and observe the introductory information and safety warn- ings on page 196. Slackening wheel bolts ›...

  • Page 200: Breakdown Kit

    › Continue turning up the jack until the wheel is just about lifted off the ground.  Breakdown kit Securing wheels against theft ä Introduction This chapter contains information on the following subjects: Fig. 161 Principle sketch: Anti-theft Components of the breakdown kit wheel bolt with adapter Preparing to use the breakdown kit Seal and inflate tyres...
  • Page 201 ä First read and observe the introductory information and safety warn- WARNING (Continued) ings on page 199. A tyre filled with sealant has the same driving characteristics as a standard ■ The breakdown kit contains the following parts: tyre. Do not drive faster than 80 km/h (50 mph). ■...
  • Page 202 › Do not remove the foreign body, e.g. screw or nail, from the tyre. Once a tyre inflation pressure of 2.0 – 2.5 bar is achieved, continue the journey at › Unscrew the valve cap. a maximum speed of 80 km/h (50 mph). ›...

  • Page 203: Jump-Starting

    WARNING (Continued) Jump-starting Keep any sources of ignition (naked flame, smouldering cigarettes, etc.) ■ away from the battery - risk of an explosion! ä Introduction Never jump-start vehicle batteries with an electrolyte level that is too low - ■ risk of explosion and caustic burns! This chapter contains information on the following subjects: Jump-starting Note...

  • Page 204: Towing The Vehicle

    Connecting negative terminal and engine block Towing the vehicle › Attach one end to the negative terminal of the battery supplying the power › Attach the other end to a solid metal part which is connected firmly to the ä Introduction engine block, or to the engine block itself.
  • Page 205 CAUTION Front towing eye Do not tow start the engine - danger of damaging the engine! On vehicles with ■ The towing eye is stored in the box of the vehicle tool kit. a catalytic converter, unburnt fuel may get into the catalytic converter where it may ignite.
  • Page 206 Use the detachable ball head for towing purposes - for the installation of the de- Rear towing eye tachable ball head refer to the operating instructions for the towing device. Towing the vehicle using the towing device is a viable alternative solution to us- ing the towing eye.

  • Page 207: Fuses And Light Bulbs

    CAUTION Fuses and light bulbs Never “repair” fuses and also do not replace them with a fuse of a higher am- ■ perage - risk of fire! This may also cause damage at another part of the electrical Fuses system. Have the electrical system checked as quickly as possible by a specialist garage ■...
  • Page 208 Power consumer Fuses in the dash panel Right side cornering lights Radio, changer for mobile navigation Towing device Light switch Haldex Control unit for headlamp beam adjustment and headlight swivel Diagnostic socket, engine control unit, brake sensor Control unit for ABS, ESP, switch for tyre air pressure control, control unit for parking aid, switch for OFF ROAD mode, START STOP button Switch and airbag control unit Fig.
  • Page 209 Power consumer Fuses in the engine compartment Engine control unit Auxiliary heating and ventilation control unit Data bus control unit Engine control unit Ignition Lambda probe, fuel pump relay Glow plug system Vehicle voltage control unit, right headlight, right tail light Horn Amplifier for digital sound processor Fig.

  • Page 210: Bulbs

    CAUTION Bulbs Do not take hold of the glass bulb with naked fingers (even the smallest ■ ä Introduction amount of dirt reduces the working life of the light bulb). Use a clean cloth, nap- kin, or similar. This chapter contains information on the following subjects: When removing and installing the tail light make sure that the paintwork of the ■...
  • Page 211 › Remove the faulty bulb from the holder and insert a new one. Headlights › Insert the rubber cover. Replacing the bulb for the side light (Xenon headlights) › Remove the rubber cover » Fig. 169. › Remove the fixture in the direction of arrow »...
  • Page 212 Fog lights and daylight driving lights Tail light assembly Fig. 172 Removing: bulb for fog lights/daylight driving lights Fig. 173 Removing the tail light assembly/disconnecting the plug connec- tion ä First read and observe the introductory information and safety warn- ings on page 209.
  • Page 213 Removing and installing the tail light › Unscrew the light using the Torx key from the car tool kit. The shorter side of the wrench is used for loosening the screws » Fig. 173 and the longer side for screwing them out completely. ›...

  • Page 214: Technical Data

    › Roof load including roof rack system; Technical data › Trailer drawbar load when towing a trailer (max. 80 kg). The following specifications are listed on the type plate » Fig. 176: Technical data Maximum permissible gross weight Maximum permissible towed weight (towing vehicle and trailer) Permissible front axle load Introductory information Permitted rear axle load...

  • Page 215: Fuel Consumption According To The Ece Standards And Eu Guidelines

    Partial description of the vehicle Dimensions 7GG, 7MB, 7MG - vehicles with DPF » page 23, Diesel particle filter (diesel engine) Dimensions (mm) Vehicle identification number (VIN) Length 4223 The vehicle identification number - VIN (vehicle body number) is stamped into the Width 1793 engine compartment on the right hand suspension strut dome.

  • Page 216: Specifications And Engine Oil Capacity

    Specifications and capacity (in l) for vehicles with fixed service intervals Specifications and engine oil capacity Filling lev- Petrol engines Specification The engine has been factory-filled with a high-grade oil that can be use through- 1.2 ltr./77 kW TSI VW 502 00 out the year - except in extreme climate zones.

  • Page 217: 1.2 L/77 Kw Tsi Engine - Eu5

    1.2 l/77 kW TSI engine - EU5 Output (kW per rpm) Max. torque (Nm at rpm) Number of cylinders/Displacement (cm 77/5000 175/1550-4100 4/1197 Performances DSG7 Top speed (km/h) Acceleration 0 - -100 km/h (s) 11,8 12,0 Fuel consumption (in l/100 km) and CO (in g/km) Intra-urban /8,0...

  • Page 218: 1.4 L/90 Kw Tsi Engine - Eu5

    1.4 l/90 kW TSI engine - EU5 Output (kW per rpm) Max. torque (Nm at rpm) Number of cylinders/Displacement (cm 90/5000 200/1500-4000 4/1390 Performances Top speed (km/h) Acceleration 0 - -100 km/h (s) 10,5/10,6 Fuel consumption (in l/100 km) and CO (in g/km) Intra-urban 8,9/7,9...

  • Page 219: Ltr./118 Kw Tsi Engine - Eu2, Eu5

    1.8 ltr./118 kW TSI engine - EU2, EU5 (1.8 ltr./112 kW TSI - EU2, EU5) Output (kW per rpm) Max. torque (Nm at rpm) Number of cylinders/Displacement (cm 118/4500-6200 (112/4300 - 6200) 250/1500-4500 (250/1500 - 4200) 4/1798 1.8 ltr./112 kW TSI. Performances MG6 4x4 DSG6...

  • Page 220: 1.6 L/77 Kw Tdi Cr Engine - Eu5

    1.6 l/77 kW TDI CR engine - EU5 Output (kW per rpm) Max. torque (Nm at rpm) Number of cylinders/Displacement (cm 77/4400 250/1500-2500 4/1598 Performances Top speed (km/h) Acceleration 0 - -100 km/h (s) 12,1 Fuel consumption (in l/100 km) and CO (in g/km) Intra-urban Ex-urban...

  • Page 221: 2.0 L/81 Kw Tdi Cr Engine - Eu5

    2.0 l/81 kW TDI CR engine - EU5 Output (kW per rpm) Max. torque (Nm at rpm) Number of cylinders/Displacement (cm 250/1500-2500 81/4200 4/1968 280/1750-2750 Performances MG6 4x4 Top speed (km/h) Acceleration 0 - -100 km/h (s) 11,6 12,2 Fuel consumption (in l/100 km) and CO (in g/km) Intra-urban Ex-urban...

  • Page 222: 2.0 L/103 Kw Tdi Cr Engine - Eu4, Eu5

    2.0 l/103 kW TDI CR engine - EU4, EU5 Output (kW per rpm) Max. torque (Nm at rpm) Number of cylinders/Displacement (cm 103/4200 320/1750-2500 4/1968 Performances MG6 4x4 DSG6 4x4 Top speed (km/h) 190/193 Acceleration 0 - -100 km/h (s) 9,9/9,7 10,2 Fuel consumption (in l/100 km) and CO...

  • Page 223: 2.0 L/125 Kw Tdi Cr Engine - Eu5

    2.0 l/125 kW TDI CR engine - EU5 Output (kW per rpm) Max. torque (Nm at rpm) Number of cylinders/Displacement (cm 125/4200 350/1750-2500 4/1968 Performances MG6 4x4 Top speed (km/h) Acceleration 0 - -100 km/h (s) Fuel consumption (in l/100 km) and CO (in g/km) Intra-urban Ex-urban...

  • Page 224: Multi-Purpose Vehicles (Af)

    Multi-purpose vehicles (AF) Weight (in kg) Engine 1.2 ltr./77 kW TSI 1.4 ltr./90 kW TSI 1.8 ltr./118 (112) kW 1.6 ltr./77 kW TDI 2.0 ltr./81 kW TDI 2.0 ltr./103 kW TDI 2.0 ltr./125 kW TDI Maximum permissi- 2070/2095 1880/1910 1915/1935 2045/2080 1950 1955/2065...

  • Page 225: Index

    Brake booster Index 27, 101 Brake fluid Park assist Checking Parking aid Brakes START/STOP Brake assist systems 27, 103 Handbrake Ability to climb Auto-Computer Running in see Slope angle see Multifunctional indicator Braking Auto Check Control Brake fluid Function Automatic driving lamp control Breakdown kit Warning light Automatic gearbox...
  • Page 226 Child safety lock Cup holder Ground clearance front Hillside angle Child safety seat rear OFF ROAD mode on the front passenger seat Overhang angle Child seat Stuck vehicle Classification DVD-preinstallation ISOFIX Dash panel insert TOP TETHER Daylight driving light Use of child safety seats De-icing the windscreen and rear window Chrome parts Economical and environmentally friendly driving 154...
  • Page 227 Engine oil Glow plug system Capacity Warning light Changing 121, 124 Knee airbag Checking Replenishing Specification Engine revolutions counter Handbrake Lever Environment Head airbag Main beam Environmental compatibility Headlight cleaning system Turn signal Headlight cleaning system Environmentally friendly driving Levers Headlights Windscreen wipers Converting...
  • Page 228 Emergency unlocking Fastening elements refer to Engine oil Fixing nets Onboard computer Radiator fan Folding hooks see Multifunctional indicator Radio reception Light Opening and closing the panoramic sliding roof Aerial see Boot lid Opening and closing the sun screen Functional fault Unlocking the boot lid Operation in winter Raise vehicle...
  • Page 229 Shifting High-pressure cleaner Diving economically Plastic parts Gearshift lever Polishing the paintwork Safe securing system Preservation Side airbag Safety Rubber seals Slop angle Child safety Washing Snow chains Child safety seats Washing by hand Spare wheel Head restraints Wash system ISOFIX Speedometer TOP TETHER...
  • Page 230 Unlocking Service life of tyres Remote control Snow chains Spare wheel Uphill start assist Wheel bolts Wheels - general information Winter tyres Window convenience operation Vehicle battery Automatic load deactivation Windows Charging De-icing Checking the electrolyte level See electric power windows Operation in winter Windscreen Replacing...
  • Page 231 ŠKODA pursues a policy of constant product and model development. We trust Reprinting, reproduction or translation, either in whole or in part, is not permitted that you will understand that changes to models in terms of shape, equipment without the written consent of ŠKODA. and engineering, may be introduced at any time.
  • Page 233 Preface You have opted for a ŠKODA – our sincere thanks for your confidence in us. Your new ŠKODA offers you a vehicle featuring the most modern engineering and a wide range of equipment. We recommend that you read this Owner's Manual carefully so that you can quickly familiarise yourself with your vehicle and all that it has to offer.

Table of Contents