Variable Loading Floor With Spare Wheel - Skoda Yeti Owner's Manual

Removing and installing carrier rails
Fig. 63 Slacken check points/remove carrier rails

First read and observe the introductory information and safety warn-
ings on page 70.
Removing
›
Slacken the check points » Fig. 63
B
a flat screwdriver.
›
Grasp the carrier rail at position
A
of arrow.
›
Grasp the carrier rail at position
A
of arrow.
Install
›
Position the carrier rails on the sides of the boot.
›
Press both check points on each carrier rail
›
Check the attachment of the carrier rails by pulling it.
WARNING
Pay attention when installing the variable loading floor that the carrier rails
and the variable loading floor are correctly fixed, otherwise the occupants are
at risk.
on the carrier rails using the vehicle key or
and slacken it by pulling in the direction
1
and slacken it by pulling in the direction
2
up to the stop.
B

Variable loading floor with spare wheel


Introduction
This chapter contains information on the following subjects:
Using the variable loading floor with spare wheel
Removable storage box
Using the variable loading floor with spare wheel
Fig. 64 Fold the side parts of the loading floor/example for using the varia-
ble loading floor

First read and observe the introductory information given on page 71.
You can fold down the side parts of the variable loading floor in direction of arrow
in order to enlarge the space foreseen for stowing items of luggage
Note
If the variable loading floor with spare wheel is installed, no flexible storage
■

compartment can be installed.
The variable loading floor with spare wheel can be secured in the raised posi-
■
tion in the same way as the variable loading floor without spare wheel
Secure the variable loading floor in the raised position.
71
72

» Fig. 64.
» page 70,

71
Seats and stowing