Folding table on the front seat rest
First read and observe the introductory information and safety warn-
ings
on page 75.
›
Fold the table into the horizontal position by pulling in the direction of ar-
row
» Fig.
79.
›
Pushing against the direction of the arrow folds the table back into the vertical
position.
WARNING
The folding table must not be in the horizontal position while driving - risk
■
of injury.
Do not put any hot drinks in the cup holder in the folding table - risk of
■
scalding!
Do not use any vessels made of brittle materials (e.g. glass, porcelain) - risk
■
of injury.
CAUTION
The folding table on the seat backrest of the front passenger seats is designed to
hold smaller objects up to a maximum total weight of 10 kg.
Fig. 79
Folding table on the front seat
rest
Folding table on the middle seat rest
First read and observe the introductory information and safety warn-
ings
on page 75.
The medium seat rest can be used after folding the
backrest forward and folding the seat fully forward armrest forward or the table
with the cup holder
» Fig.
80.
Two beverage containers can be placed into the recesses.
WARNING
Never put hot beverage containers in the cup holder. If the vehicle moves,
■
they may spill – risk of scalding!
Do not use any cups or beakers which are made of brittle material (e.g. glass,
■
porcelain). This could lead to injuries in the event of an accident.
CAUTION
Do not leave open beverage containers in the cup holder during the journey.
■
There is a risk of spilling e.g. when braking which may cause damage to the elec-
trical components or seat upholstery.
If the middle rear seat backrest should be folded forward for lengthy periods,
■
then make sure that the belt locks are not located below it - this can warp the
upholstery or fabric.
Fig. 80
Rear seats: Armrest
» page
64, Folding the seat
79
Seats and stowing