Santana PS-10 Service Manual page 335

6A-124 ENGINE REPAIR
X
X
2,230 ÷ 2,690
X
D
E
X Valves head thickness
1,2 ÷ 1,5
1,0 ÷ 1,3
Overhanging injectors
X
3) Measure valves and thickness overhanging injectors. Values
obtained must be within specified values (see table herewith).
NOTE:
If any value exceeds the limit, replace faulty piece.
Valves impermeability.
4) With tools (D) and (E) check valves impermeability.
NOTE:
If there are signs of any leaks check if they are through
the valves or through the injector seating or casing;
rectify again faulty seating or casing.