Santana PS-10 Service Manual page 285

6A-74 ENGINE REPAIR
24
I
28
29
23
28
30
4) Install axle and driving or driven gear (24).
Covers installation
5) On upper front cover (23), install a new oil-seal (28) using an
appropriate pushing and knocking rod (I).
23
6) Fit new gasket (29) on cover (23), lubricate oil-seal (28) and
install cover tightening screws (30) to the specified tightening
torque.
Tightening torque for screws front cover:
2,3 Kg-m (23 Nm)
7) Apply a coat of recommended sealant (J) 790962 over the
J
face of coupling of rear cover (11).
11