Santana PS-10 Service Manual page 321

6A-110 ENGINE REPAIR
14
15
1
7
2
16
3 mm
3,6 mm
16
17
3
Assembly rearranging piston and connecting
rod
NOTE:
If pistons are going to be installated again they must be
matched with their respective connecting rods and later
installated on the same cylinders they connecting rod from.
1) Once selected pistons and connecting rods, proceed to the
rearranging of assembly.
In order to do this, you must know the meaning of marks
engraved at the pistons head.
• (14).- Engine type, class of piston and purveyor.
• (15).- Number code for optical reading of engine and
selection of classes.
• (16).- Spatial direction of assembly of piston on
connecting rod and cylinder.
NOTE:
All pistons must have the same weight.
2) Fit piston (1) to connecting rod (7) in such a way that the
reference of assembly (16) and the numbers of matching
connecting rod and cover (17) are oriented in the same side.
3) Connect pistons and connecting rods using bolts or rods (3)
and elastic rings (2).