Lexmark Optra T 4069 series Service Manual page 50

4069-XXX
User Message
Tray X Empty
Tray X Low
User Line 2 Link Messages
If the printer is locked on a particular link, the link indication displays.
If the printer is ready to process any link, no messages display. The
link messages are listed in the following table.
User Message
Parallel
Serial
Serial X
Network X
Explanation
If any of the input trays are empty, then "Tray X
Empty" displays where X designates which tray
(Tray 1 through 5) is empty. If multiple trays are
empty, then they are prioritized in this order: Tray
5, Tray 4,...Tray 1.
Note: Tray X Empty status clears whenever Tray
X is removed. When Tray X is reinserted, it is
examined and the appropriate status, if any,
displays. Also note that Empty status is not
displayed for the Envelope Feeder or
Multipurpose Feeder.
If any of the input trays are low, then "Tray X Low"
displays where X designates which tray (1
through 5) displays. If multiple trays are low, they
are prioritized in the following order: Tray
5,4,3,2,1.
Note: Tray X Low clears whenever Tray X goes
empty, or Tray X is removed. When Tray X is
reinserted, it is examined and the appropriate
status, if any, displays.
Note: The printer cannot detect when the
envelope feeder or multipurpose feeder are low.
Explanation
Standard Parallel Port, if available.
Standard Serial Port, if available.
Serial Port, where X=1,2,3, is attached to PCI
connector X.
Network card X, X=1,2,3, is attached to PCI
connector X.
Diagnostic Information
2-21