Fuser Envelope Conditioner Solenoid (Hot Roll) - Lexmark Optra T 4069 series Service Manual

4069-XXX

Fuser Envelope Conditioner Solenoid (Hot Roll)

The solenoid is in all models except 31v/31e and 31v/31e at service
level B.
1. Remove the fuser assembly.
2. Remove the solenoid mounting screw (A).
3. Disconnect the solenoid link (B).
4. Remove the solenoid from the fuser assembly.
Note: Do the
you replace the fuser solenoid.
"Fuser Solenoid Adjustment" on page 4-3 whenever
Repair Information
4-29