Table of Contents
Advertisement
4069-XXX
User Status Message
Restoring Factory
Defaults
Performing Self Tests
Not Ready
(Press Go)
Resetting Printer
Formatting Flash
(Do Not Power Off)
Program Flash
(Do Not Power Off)
Formatting Disk
2-14
Service Manual
Status
The printer is restoring
factory defaults.
The printer is running
the normal series of
start-up tests after it is
powered On. When the
tests are complete, the
printer returns to Ready.
The printer is in the Not
Ready state, which
means it is not ready to
receive or process data.
This message displays
when Menu> or <Menu
is pressed during a print
job.
The printer is deleting
any print jobs in process
and restoring all settings
to user defaults.
The flash memory is
being formatted.
The flash memory is
being programmed,
which means fonts or
macros are being written
to flash memory.
The disk is being
formatted.
Action
No button actions are
possible while this
message is displayed.
No button actions are
possible while this
message is displayed.
Press Go to take the
printer out of the Not
Ready state. Press
Menu> or <Menu to
take the printer out of
Ready and enter the
TESTS MENU (Busy
state). Press Menu>
until Reset Printer is
on the second line of
the display. Press
Select to reset the
printer.
No button actions are
possible while this
message is displayed.
No button actions are
possible while this
message is displayed.
Do not perform any
button actions while
this message is
displayed.
No button actions are
possible while this
message is displayed.
Advertisement
Table of Contents
