Min Max Softkeys - Fluke 867B User Manual

867B/863
Users Manual

Min Max Softkeys

Softkeys accessed by pressing M are:
Min Max Run
Off Restart Pause
Minimum, maximum, and average measurements
are displayed (with timer information) in the graphical
display (Combo and Trend) or meter display (Meter).
In the View mode, Min Max is enabled and the MIN -
MAX icon appears in the upper status line. However,
Min Max measurement readings and timer
information cannot be viewed on the waveform
screen.
1 (Min Max Off) turns the Min Max feature off.
The GMM test tool returns to its normal display
mode. Measurement values and timer information
cannot be recovered at this point.
2 (Restart) resets all values/timers and begins
with new values and timers. Previous measurement
values and timer information cannot be recovered at
this point.
4-4
3 (Run Pause) toggles between the normal "Run"
state and a temporary "Pause" condition. Changing
display modes when Min Max is active does not
change the "Run" or "Pause" state.
Exit
In Combo, Meter, and Trend modes, "Pause" turns
the "Min Max" icon at the top of the display dark, and
displayed values stop updating (although the
elapsed time continues counting.) In View Mode,
"Run" and "Pause" operate normally, but
measurement readings and timer information cannot
be viewed.
5 (Exit) returns the softkeys to the functions for
the selected measurement mode while the
remainder of the display remains unchanged. You
must use the Display mode key to return the window
and secondary displays to the Combo, Meter, or
Trend display. Min Max will remain enabled in the
background mode.