Save/Print Softkeys - Fluke 867B User Manual

Save/Print Softkeys

Softkeys accessed by pressing P are:
Save > >
Screen Recall Print
1 (Save Screen) accesses the Save Screen
softkeys, which allow you to save the present display
to a memory location. (Model 867B only.)
2 (Recall) accesses the Recall softkeys, which
allow you to display the contents of a memory
location.
3 (Print) prints the display. "Freeze" changes to
"Printing", then reverts to "Freeze" when printing is
complete. You can stop printing by pressing 3
(Stop Print) or 5 (Exit); all other key presses are
ignored.
4 (Save Config.) accesses the Save Config
softkeys.
5 (Exit) returns to the original display. You can
also press P again to return to the original
display. You must press one of these two keys to
Save >
Config. Exit
return; other keys do not operate during the Freeze
display.
Press P to stop waveform and numerical value
updates. Display contrast is reversed, the "Freeze"
message appears, and the Save/Print Softkeys are
accessed. You can now Print display information or
Save and Recall display and configuration
information.
"Enable RS232" in TrendGraph™ Mode is canceled.
Touch Hold, Min Max, Trend, and "Peak Hold"
continue to update in the background (beeps
continue).
Refer to Chapter 6 for a full description of saving and
recalling operations available with Freeze.
Using the Hardkeys
4
Save/Print Softkeys
4-3