Recalling Screen Or Configuration; Previewing Screen Or Configuration - Fluke 867B User Manual

867B/863
Users Manual

Recalling Screen or Configuration

>
Recall
View >
] [
Memory
1 and 2 cycle through memory locations
(seven configuration memories for all models and
three display memories on Model 867B only).
3 (View Memory) previews the selected memory
and accesses the View Memory softkeys. "View
Memory" does not appear if memory is empty.
Previewed memory always appears in reverse video.
4 (Load Screen or Load Config) directly replaces
the active display with the selected display from
memory. The selector function must match that of
the presently selected memory list item, and the
selected memory location must be occupied.
5 (Exit) returns to the Print/Save softkeys
(display frozen).
6-4
Load
Screen Exit

Previewing Screen or Configuration

>
View>
Recall Memory
] [
Print
1 and 2 scroll through memory locations for
previewing (reverse video).
3 (Print) begins printing the display. "Printing ..."
appears on the display and "Stop Print" defines the
softkey. Press 3 again to stop printing, or wait
until "Print" becomes the softkey label again.
4 (Load Config. or Load Screen) can be used if
the selected memory matches the present selector
function configuration and the selected memory
location is occupied.
"Load Config" appears when you select one of the
seven configurations. The GMM loads the selected
configuration and returns to the active display.
Load
Config. Exit