Cold Weather Watch - Carrier ComfortPro PC6000 Operation & Service Manual

NOTICE
Factory Default Temperature Setting
-10°C / 14°F. Range is - 20°C / -4°F to
5°C / 41°F.
1-10

1.3.6 Cold Weather Watch

You can set up the APU so that it automatically runs for a specified time
whenever the ambient temperature goes below a specified value. This
feature ensures that the APU engine and truck engine do not get so cold
that they will not start.
This feature is not intended to maintain a comfortable truck bunk
temperature; instead, see "Comfort Monitor".
Turning Cold weather watch On and Off
1 Press .
2 Press or
"TEMP START" is displayed, then
press .
If "ENTER PASSWORD" is displayed, enter your password. If you do not
know the password, then you cannot set up this function (see page 1-5).
3 Press or
4 Press to confirm this setting.
The current setting remains until you change it; turning off the APU or
manually starting the APU does not permanently cancel this setting.
Setting the START TEMPERATURE
1 Press .
2 Press or
"TEMP START" is displayed, then
press .
If "ENTER PASSWORD" is displayed, enter your password. If you do not
know the password, then you cannot set up this function (see page 1-5).
3 Press or
4 Press to confirm this setting. The current start temperature
is displayed.
5 Press or
6 Press to confirm this setting. Or press
retain the current start temperature.
7 Press to exit.
HOURS
00000
until
TEMP START
to display "ON" or "OFF".
HOURS
00000
until
TEMP START : SET TEMP
to display "SET TEMP".
to scroll to the desired start temperature.
62-11175 COMFORTPRO SERVICE MANUAL
APU OFF
OFF
ON
APU
OFF OFF
-10C 14F
to cancel and