Fan Operation; Automatic Operations; Password Protection - Carrier ComfortPro PC6000 Operation & Service Manual

62-11175 COMFORTPRO SERVICE MANUAL

1.2.7 Fan Operation

You can still have the fan working even when the temperature is not low or
high enough for the heat or A/C to come on.
The fan operation is independent of the air conditioning and heat modes.
When the fan speed is manually set to high or low, the fan will return to
that setting when the desired temperature has been reached as the air
conditioning or heat cycles off.
Press
high and off.
The speed of the fan may automatically
change when the heat or A/C comes on,
then automatically change back when
the heat or A/C goes off.

1.3 AUTOMATIC OPERATIONS

1.3.1 Password Protection

You can add a password to the DCP, then you can protect one or more
functions so that only a person who knows the password can set the function.
On a newly installed DCP, the password is always 000, which means that
no password protection is in place.
To password-protect functions, first change the factory password; see
'Setting up for Password Protection'. All functions will now be password
protected. Then remove password protection from chosen functions, as
desired; see 'Protect Functions with a Password'.
If you know the password, you can change it at any time, if you need to.
Note that if you change the password to 000, you will remove password
protection from all functions.
If the password is ever lost, contact your dealer to have the password
reset to 000.
Setting up for PASSWORD PROTECTION
1 Press
2 Press
then press
"ENTER PASSWORD" is displayed
with three blank squares, one for
each digit in the password. The
first digit flashes.
to toggle between low,
.
or until "SET/CHANGE PASSWORD" is displayed,
.
HOURS
APU
00000
C
HOURS
APU
00000
C
HOURS
APU
00000
ENTER PASSWORD
000
FAN
LOW
H
FAN
HIGH
H
OFF OFF
1-5