Timer - Carrier ComfortPro PC6000 Operation & Service Manual

NOTICE
Factory Default Temperature Setting is
21°C / 70°F. Range is 18°C / 64°F to
30°C / 86°F.
1-8
Setting the TEMPERATURE
1 Press .
2 Press or
"COMFORT MONITOR" is displayed,
then press .
If "ENTER PASSWORD" is displayed, enter your password. If you do not
know the password, then you cannot set up this function (see page 1-5).
3 Press or
4 Press to confirm this setting. The current temperature is displayed.
5 Press or
6 Press to confirm this setting. Or press
retain the current temperature.
7 Press to exit.

1.3.5 Timer

You can set up the ComfortPro so that the APU and CCU run automatically for
a specified time on specified days of the week. There are two timers, so you
can set up two schedules.
For example, one schedule may be to run every day at 6:00 p.m. for .5 hours
and the other schedule may be to run every Monday at 6.00 a.m. for .5 hours.
You must set up the timer as follows: Specify the day and time you want
the APU to run, specify the duration (the length of time you want the APU to
run for) and specify the temperature you want maintained in the truck bunk
while the APU is running.
Turning TIMER On or Off
1 Press .
2 Press or
"TIMER 1" or "TIMER 2" is displayed,
then press .
If "ENTER PASSWORD" is displayed, enter your password. If you do not
know the password, then you cannot set up this function (see page 1-5).
3 Press or
4 Press to confirm this setting.
The current setting remains until you change it; turning off the APU or
manually starting the APU does not cancel the timer function.
HOURS
00000
until
COMFORT MONITOR
to display "SET".
to scroll to the desired temperature.
HOURS
00000
until
TIMER 1
to display "ON" or "OFF".
62-11175 COMFORTPRO SERVICE MANUAL
APU
SET
to cancel and
APU T OFF
OFF
1
ON