Operation Of Multi-Function D.c.p; Preparation; Driver Control Panel - Carrier ComfortPro PC6000 Operation & Service Manual

NOTICE
The DCP (driver control panel), which
is mounted inside the truck bunk,
controls the APU and the CCU. The
central panel on the DCP provides
status information using words
and icons:
62-11175 COMFORTPRO SERVICE MANUAL
1.0 OPERATION OF MULTI-FUNCTION

DRIVER CONTROL PANEL

4
3
2
1
Figure 1-0: Multi-Function Driver Control Panel
1.1

PREPARATION

1.1.1 Multi-Function Driver Control Panel Components
1 When visible, the heating system is heating.
2 When visible, the A/C is cooling.
3 Indicates the number of operating hours on the APU.
4 Indicates the state of the APU.
The APU engine is running.
APU
The APU engine is off.
APU
The APU engine is in the starting process (flashing).
APU
5 Indicates that Battery Monitor mode is enabled.
6 Indicates that maximum run time is enabled.
7 Indicates that Cold Weather Watch mode is enabled.
8 Indicates that Comfort Monitor mode is enabled.
T T
9 Indicates that Timer 1 or Timer 2 mode is enabled.
1 2
10 Indicates that the ComfortPro is connected to shore power.
The APU cannot be started in Shore Power mode.
11 Indicates the state of the 115V outlet and CCU auto-reset breakers.
115 VAC power is being supplied to the outlet.
OFF No power is being supplied to the outlet.
TRIP CCU breaker has tripped.
High Heat/Outlet breaker has tripped.
TRIP
RE-
The breaker that tripped has reset automatically and the DCP needs
SET
to be reset.
5
HOURS
APU
APU
00000
ON/OFF
MENU
A/C
10
6 7 8 9
T T SP
1 2
RESET
FAN HEAT
11
HVAC
OFF
ESC/
1-1