Specifying The Document Size - Canon imageRUNNER 1750i Facsimile Manual

Specifying the Document Size

You can manually specify the document size when the machine cannot detect the
paper size automatically, such as when scanning transparencies.
IMPORTANT
• The machine cannot automatically detect the size of the originals listed below. Specify
the size of these documents manually.
3
- Nonstandard size originals
- Highly transparent originals, such as transparencies
- Originals with an extremely dark background
- A5 originals that are placed on the platen glass
• If you place your originals into the feeder, their horizontal length (X) to the scanning
direction is scanned at the actual size of your originals even if you manually specify the
document size different from your originals. The vertical length (Y) to the scanning
direction is scanned at the document size you specify manually.
NOTE
The default setting is 'Auto'.
1
Press
destination.
NOTE
• For instructions on how to place your originals, see Chapter 2, "Basic Operations," in
the Reference Guide.
• For instructions on how to specify the destination, see "Basic Sending Methods," on
p. 2-2, or Chapter 4, "Specifying Destinations Easily and Quickly."
3-6

Specifying the Document Size

(SEND) ➞ place your originals ➞ specify the