For More Information, See Chapter - Canon imageRUNNER 1750i Facsimile Manual

4
5
In this step, the keys listed below are also available as needed.
[Tone]:
[R]:
[End]:
NOTE
• For instructions on how to enter characters, see Chapter 2, "Basic Operations," in the
Reference Guide.
• You cannot use group dialing for the Manual Sending mode.
6
When you hear a high-pitched tone, press
scanning your originals.
To cancel scanning, press [Cancel] or
The scanned data is sent to the specified destination when scanning is complete.
Press [Scan Settings] to specify
the scan settings you require.

For more information, see Chapter 3,

"Specifying the Scan Settings."
Enter the fax number (up to 120
characters) using
(numeric keys).
If the number is registered in the one-touch
buttons, you can also press [One-touch
Buttons] to specify the number. (See
"Using the One-Touch Buttons," on
p. 4-35.)
Press when you want to directly call an extension line that is
connected to a PBX (Private Branch eXchange), which accepts
only tone dialing. If you press [Tone], the letter <T> appears.
Press to use the R-key. (See "Calling from an Extension," on
p. 2-51.)
Press to cancel the Manual Sending mode.
(Stop).
-
(Start) to start
Basic Sending Methods
2
2-33