■ File server
Sends scanned documents to a file server. Scanned documents are converted to
file formats such as TIFF and are transmitted to the specified file server.
■ USB memory media device
Stores scanned documents in a USB memory media device. Scanned
documents are converted to file formats such as TIFF and are transmitted
directly to the USB memory media device connected to the machine.
IMPORTANT
To store scanned documents in a USB memory media device, set Use Scan to
Memory Media in Memory Media Settings to 'On'. (See Chapter 4, "Setting the Send
Function," in the System Settings Guide.)
■ Fax
Sends scanned documents as faxes.
IMPORTANT
To use the Fax function, the optional Super G3 Fax Board-AJ1 is required.
Keys and Functions
Whenever using Send and Fax functions, you need to press
first to switch the screen shown below, called the top screen (Send). The top screen
(Send) that is displayed varies depending on the optional Super G3 Fax Board-AJ1
installed and the settings specified, as shown below.
■ If the Super G3 Fax Board-AJ1 is attached to the machine
Overview of Send and Fax Functions
1
(SEND)
1-3