Additional Functions Settings Table - Canon imageRUNNER 1750i Facsimile Manual

Additional Functions Settings Table

The tables below list the Address Book Settings, Communications Settings, and
Report Settings that can be selected from the Additional Functions menu. Some
functions can be used only when the appropriate optional equipment is attached.
■ Communications Settings
Common Settings
TX Settings
Unit Name
Data Compression
Ratio
Retry Times
Edit Standard Send
Settings
TX Terminal ID
Gamma Value for Color
Send Jobs
Sharpness
10
The default settings are indicated in bold.
*1 Indicates items that are available only when the optional Super G3 Fax Board-AJ1 is
attached to the machine.
*2
The setting for [Sharpness] is invalid when all of the conditions below are met.
- [100 × 100 dpi], [150 × 150 dpi], or [200 × 100 dpi] is selected as the resolution. (See
"Specifying the Color Mode and Resolution," on p. 3-2.)
- [B&W] is selected as the color mode. (See "Specifying the Color Mode and
Resolution," on p. 3-2.)
- [Text] is selected as the image quality. (See "Adjusting the Density and Image Quality,"
on p. 3-9.)
To activate [Sharpness], change the settings.
10-2

Additional Functions Settings Table

Item
24 characters maximum
High Ratio, Normal, Low Ratio
0 to 5 times; 3 times
Store, Initialize
On
Printing Position: Inside, Outside
Telephone # Mark
Off
Gamma 1.0, Gamma 1.4, Gamma 1.8, Gamma
2.2
*2 7 levels; 4
Settings
*1 : FAX, TEL
Applicable
Page
p. 1-11
p. 7-2
p. 7-4
p. 7-5
p. 7-9
p. 7-13
p. 7-14