Power Management Setup Page - ECS ES4M Series User Manual

Mainboard User's Manual
Hyper Threading
Function
Auto Detect
DIMM/PCI Clk
Spread Spectrum
DOS Flat Mode

Power Management Setup Page

This page sets some of the parameters for system power
management operation.
AMIBIOS SETUP – POWER MANAGEMENT SETUP
(C) 2000 American Megatrends, Inc. All Rights Reserved
ACPI Aware O/S
Power Management
Suspend Time out
Hard Disk Time out
Resume On RTC Alarm
RTC Alarm Date
RTC Alarm Hour
RTC Alarm Minute
RTC Alarm Second
LAN/Ring Power On
Keyboard Power On
ACPI Aware O/S
Enable this item if you are using an O/S that
supports ACPI function such as Windows 98/ME
/2000.
Power
Use this item to select a power management
scheme. Both APM and ACPI are supported.
Management
28
If your P4 CPU is not HT CPU, this item will
be hidden. If your P4 CPU is HT CPU, BIOS
will show this item. You can set "Disabled" or
"Enabled" to control HT CPU support in O.S.
Set "Enabled" to test HT CPU function.
When this item is enabled, BIOS will disable
the clock signal of free DIMM/PCI slots.
If you enable spread spectrum, it can
significantly reduce the EMI(Electro-Magnetic
Interference) generated by the system.
This item enables BIOS to enter the DOS
protected mode without other software
supporting under the DOS operating system.
We recommend you leave this item at the
default value.
Yes
Enabled
Disabled
Disabled
Disabled
15
ESC : Quit
12
F1 : Help
30
30
F5 : Old Values (Shift)F2 : Color
Disabled
F6 : Load BIOS Defaults
Disabled
F7 : Load Setup Defaults
↑↓←→ : Select Item
PU/PD/+/- : Modify