Install The Mainboard - ECS ES4M Series User Manual

JP1: Keyboard Power On
If the Keyboard Power On is enabled, hot keys on the keyboard
can work as a power on/off switch for the system.
Function
Disabled
Enabled
Note: The system must supply at least 1A on the +5VSB (+5V
Standby) signal before enabling the Keyboard Power On function.

Install the Mainboard

Install the mainboard in a system chassis (case). The board is a
Mini-Micro ATX size mainboard. You can install this mainboard
in an ATX case. Ensure that your case has an I/O cover plate that
matches the ports on this mainboard. Install the mainboard in a
case. Follow the instructions provided by the case manufacturer
using the hardware and internal mounting points on the chassis.
JP5
1
1
FP1
Connect the power connector from the power supply to the
ATXPW1 connector on the mainboard.
If there is a cooling fan installed in the system chassis, connect the
cable from the cooling fan to the FAN2 fan power connector on the
mainboard.
2: Mainboard Installation
Jumper Setting
Short Pins 1-2
Short Pins 2-3
ATXPW1
FAN2
15