Preface; About This Manual; Conventions In This Manual; Intended Use - Bosch VIP X1 XF Installation And Operating Manual

6 en | Preface
1

Preface

1.1

About this Manual

This manual is intended for persons responsible for the installation and operation of the
VIP X1 XF. International, national and any regional electrical engineering regulations must be
followed at all times. Relevant knowledge of network technology is required. The manual
describes the installation and operation of the unit.
1.2

Conventions in this Manual

In this manual, the following symbols and notations are used to draw attention to special
situations:
CAUTION!
This symbol indicates that failure to follow the safety instructions described may endanger
persons and cause damage to the unit or other equipment.
It is associated with immediate, direct hazards.
NOTICE!
This symbol refers to features and indicates tips and information for easier, more convenient
use of the unit.
1.3

Intended Use

The VIP X1 XF network video server transfers video, audio and control signals over data
networks (Ethernet LAN, Internet). There are various memory options for recording the
images captured by the connected camera. The unit is intended for use with CCTV systems.
Various functions can be triggered automatically by incorporating external alarm sensors.
Other applications are not permitted.
In the event of questions concerning the use of the unit which are not answered in this
manual, please contact your sales partner or:
Bosch Sicherheitssysteme GmbH
Werner-von-Siemens-Ring 10
85630 Grasbrunn
Germany
www.boschsecurity.com
DOC | V4.1 | 2010.02 Installation and Operating Manual
VIP X1 XF
Bosch Sicherheitssysteme GmbH