Basic Mode: Date/Time - Bosch VIP X1 XF Installation And Operating Manual

VIP X1 XF
5.4

Basic Mode: Date/Time

Device date / Device time / Device time zone
If there are multiple devices operating in your system or network, it is important to
synchronize their internal clocks. For example, it is only possible to identify and correctly
evaluate simultaneous recordings when all units are operating on the same time. If necessary,
you can synchronize the unit with your computer's system settings.

Time server IP address
The VIP X1 XF can receive the time signal from a time server using various time server
protocols, and then use it to set the internal clock. The unit polls the time signal automatically
once every minute.

Time server type
Select the protocol that is supported by the selected time server. Preferably, you should
select the SNTP server as the protocol. This supports a high level of accuracy and is required
for special applications and subsequent function extensions.
Select Time server for a time server that works with the protocol RFC 868.
Bosch Sicherheitssysteme GmbH
Click the Sync to PC button to copy your computer's system time to the VIP X1 XF.
Enter the IP address of a time server here.
Installation and Operating Manual
Configuration Using a Web Browser | en
DOC | V4.1 | 2010.02
27