Additional copy operations
Why is the button for the setting that I wish to change not dis-
?
played?
The copy setting cannot be changed.
% If the copy settings cannot be changed, stop printing the proof
copy. Then, press the [Reset] key to cancel the copy settings, and
then specify the desired settings.
7
Press the [Proof Copy] key to print another sample copy.
–
To stop the proof copy while scanning or printing, perform the
operation described in "Stopping scanning/printing" on
page 4-102.
8
Touch [Print].
The remaining copies are queued as a copy job.
CS191 (Phase3)
5
5-9