Basic copy operations
4
Using the keypad, type in the desired
number of copies.
–
If the number of copies was
incorrectly entered, press the [C]
(clear) key in the keypad, and
then specify the correct number
of copies.
5
Press the [Start] key.
–
To stop the copy operation being
performed, press the [Stop] key.
For details, refer to "Stopping
scanning/printing" on
page 4-102.
–
The next copy operation can be
queued while a copy operation is
being performed. For details,
refer to "Scanning the next original to be copied while a copy job is
being printed (next job reservation)" on page 4-100.
CS191 (Phase3)
4
4-5