Adjusting The Seat Depth To The User's Seating Position - Invacare Spectra XTR Service Manual

®
Invacare - Bora
8

Adjusting the seat depth to the user's seating position

In order to adapt the mobility device optimally to the requirements of the user, we recommend that
you ask your authorised Invacare® the dealer toadjust the seat depth individually.
Adapting the seat to the user's seating position depends on which seat has been fitted, and should
be carried out in the following sequence.
1. Adjust the seat depth to the seat frame.
2. Adjust the seat area.
3. Check to ensure that the steering wheels can rotate freely
4. Repeat steps 1 to 3 if necessary
A seat frame with a range of threaded holes is located under the seat. Depending on which seat
which has been fitted, it can be adjusted to various locations on the seat frame which defines the
seat depth.
In addition, you can move the seating area and fix it in different positions.
WARNING!
Danger of injury hazard after tilting of mobility caused by blocked steering wheels.
 Always check the seat depth settings for both forward and reverse movement.Make sure that
steering wheels can rotate freely and have not contact to any fixed mobility device
component.
What needs to be observed when adjusting the seat depth?
If the seat depth is too short, the force required when the user stands up is too high. If the seat
depth is set too long, the user may "slump down" while getting up.
Requirements:
 Allen key 5 mm
SERVICE MANUAL
85