Toshiba libretto U100 Maintenance Manual page 292

4 Replacement Procedures
4.20.6 DD board
Removing the DD board
To remove the DD board, follow the steps below and refer to Figure 4-44.
1. Disconnect the Dock cable from the connector CN9810 on the DD board.
2. Remove the following screws and DD board from the dock base.
• M2×4B
M2×4B BIND
Installing the DD board
To install the DD board, follow the steps below and refer to Figure 4-44.
1. Connect the Dock cable to the connector CN9810 on the DD board.
2. Install the DD board to the slot and secure it with the following screws.
•
4-66 [CONFIDENTIAL]
BIND screw
CN9810
DD board
Figure 4-44 Removing the DD board
M2×4B BIND screw
4.20 libretto DVD Dock
×2
Dock cable
×2
libretto U100 Maintenance Manual (960-520)