4.6 Top cover assembly
6. Remove the following screw and lift up the top cover assembly form the base
assembly.
• M2×4S
CAUTION: When lifting up the top cover assembly from the base assembly, be careful
that wireless LAN antenna cable is connected to the wireless LAN card on
the base assembly.
7. Disconnect the wireless LAN antenna cable from the wireless LAN card.
libretto U100 Maintenance Manual (960-520)
S-FLAT HEAD screw
Figure 4-9 Removing the top cover assembly (3)
4 Replacement Procedures
×1
M2×4S S-FLAT HEAD
Top cover assembly
Wireless LAN antenna cable
[CONFIDENTIAL]
4-19