Toshiba libretto U100 Maintenance Manual page 277

4.19 Harness assembly/Hinge
3. Take the speaker (with holder) out from the slot.
4. Peel off the three acetate tapes, wireless LAN antenna and Bluetooth antenna.
5. Remove the following screw and earth cable (drain line) from the back.
• M2×3S
Bluetooth antenna
Earth cable (drain line)
Figure 4-31 Removing the speaker/wireless antenna/Bluetooth antenna
libretto U100 Maintenance Manual (960-520)
S-FLAT HEAD screw
Acetate tape
Wireless LAN antenna
M2×3S S-FLAT HEAD
4 Replacement Procedures
×1
Speaker (with holder)
[CONFIDENTIAL] 4-51