4.16 LAN•Modem jack/DK board
Installing the LAN
•
To install the LAN
Modem jack/DK board, follow the steps below and refer to Figure 4-24.
•
1. Connect the DK cable to the connector CN9760 on the DK board.
2. Install the DK board and secure it with the following screw.
• M2×4B
3. Install the LAN
libretto U100 Maintenance Manual (960-520)
Modem jack/DK board
BIND screw
Modem jack to the slot.
•
×1
[CONFIDENTIAL]
4 Replacement Procedures
4-43