Toshiba libretto U100 Maintenance Manual page 291

4.20 libretto DVD Dock
4.20.5 DM board
Removing the DM board
To remove the DM board, follow the steps below and refer to Figure 4-43.
1. Disconnect the Dock cable from the connector CN9800 on the DM board.
2. Remove the following screws and DM board from the dock base.
• M2×4B
Dock cable
Installing the DM board
To install the DM board, follow the steps below and refer to Figure 4-43.
1. Install the DM board to the slot and secure it with the following screws.
•
2. Connect the Dock cable to the connector CN9800 on the DM board.
libretto U100 Maintenance Manual (960-520)
BIND screw
M2×4B BIND
CN9800
Figure 4-43 Removing the DM board
M2×4B BIND screw
4 Replacement Procedures
×2
DM board
×2
[CONFIDENTIAL] 4-65