Toshiba libretto U100 Maintenance Manual page 288

4 Replacement Procedures
4.20.3 Fan
Removing the Fan
To remove the fan, follow the steps below and refer to Figure 4-41.
1. Remove the following screws and disconnect the fan cable from the connector
CN8270 on the DM board.
• M2×4B
2. Remove the fan from the slot.
Installing the Fan
To install the fan, follow the steps below and refer to Figure 4-41.
1. Install the fan to the slot and secure it with the following screws.
• M2×4B
2. Connect the fan cable to the connector CN8270 on the DM board.
4-62 [CONFIDENTIAL]
BIND screw
Fan cable
CN8270
Figure 4-41 Removing the fan
BIND screw
4.20 libretto DVD Dock
×2
M2×4B BIND
Fan
×2
libretto U100 Maintenance Manual (960-520)