Using the PXC 310 BT
1
5
1
5
16
Using the PXC 310 BT
Switching the headphones on/off
CAUTION!
Hearing damage due to high volumes!
Listening at high volume levels for long periods can lead to
permanent hearing defects. Please protect your hearing.
Sennheiser headphones also sound exceptionally good at low
volumes.
Set the volume to a medium level.
Switching the headphones on
Press the
Master
button
flashes blue. You hear an ascending beep.
– When switching the headphones on
automatically go into pairing mode.
The headphones are waiting to be paired with a Bluetooth enabled
device (see page 11).
– When the headphones
are already paired with an audio
Bluetooth connection is automatically established.
You hear an ascending beep and then your audio source.
– When the headphones
are already paired with an audio source
the
audio source
is
switched off
flashes blue.
The headphones will try for 3 minutes to connect to one of the
5 known audio sources. If this fails, the headphones automatically
switch off.
Switching the headphones off
Press the
Master
button
flashes 3 times red.
You hear a descending beep. The Bluetooth connection is automatically
deactivated. The headphones switch off.
and keep it pressed until the
for the first
time, they will
or out of range, the
and keep it pressed until the
Star
LED
source, the
but
Star
LED
Star
LED