Draytek Vigor2130 Series User Manual page 104

Counter
Refresh
Clear
Click OK to save the settings.
R a t e L i m i t e r I D
R a t e L i m i t e r I D
Configure the rate limiter for the ACL (Access Control List) of the router. Please click Rate
Limiter ID link to access into the following page.
Rate Limiter ID
Rate
Counts the number of frames that match this Access Control
Entry (ACE).
Click this button to refresh the number of the counter
immediately.
Click this button to clear the number of the counter on this
page.
Rate limiter ID will be applied to WAN port and LAN port.
Please specify a rate number for each ID. The default setting
is "1"(packet per second).
Define the rate by choosing from the following drop down
list.
96
Vigor2130 Series User's Guide