Draytek Vigor2130 Series User Manual page 211

Allow IPSEC/L2TP
Allow PPTP
Allow FTP
Allow TELNET
When you finish the settings, simply click OK to save the configuration. The new user will be
created and displayed on the page.
E d i t i n g
E d i t i n g
To edit a user, click the name link under Username to open the following page. Modify the
settings except Username and then click OK to save and exit it. If you want to remove such
user settings, simply click Delete User.
Vigor2130 Series User's Guide
Check this box to let the remote user connecting to this device
through IPSEC/L2TP.
Check this box to let the remote user connecting to this device
through PPTP.
When such user profile needs to have PPTP LAN to LAN
connection, the following three items must be adjusted.
Enable PPTP LAN to LAN – Check this box to let such user
profile supporting PPTP LAN to LAN.
Local Network / Mask –Traffic between this subnet and the
subnet specified in Remote Network / Mask will travel
through the VPN tunnel.
Remote Network / Mask –Add a static route to direct all
traffic destined to this Remote Network IP Address/Remote
Network Mask through the VPN connection.
Check this box to let the remote user connecting to FTP server
via this router.
Check this box to let the remote user to adjust the settings of
router by TELNET.
/ D e l e t i n g U s e r S e t
/ D e l e t i n g U s e r S e t
t i n g s
t i n g s
203