Ftp Client Port Number - Konica Minolta 7145 User Manual

FTP Setup (Part 2 of 2)
1
Use [ ] or [
For details on the procedure for displaying the [Network Setting] screen, refer to [4-2.Method for Setting Network
from Control Panel] (

FTP Client Port Number

This specifies a port number to use for communicating with the FTP server.
G Changing the Port Code in an improper manner can result in damage to the network. Do not change the
Port Code unless it is necessary to do so.
1
Touch the [FTP Client Port No.] key.
2
Using the control panel, enter a number between 1 and 65535.
The factory default Port Number is [21].
Connection Timeout
This function automatically stops the upload if communications bog down during data uploading to the
FTP server and a certain period of time elapses.
[Conncetion Timeout] sets this time value.
1
Touch the [Connection Timeout] key.
2
Using the control panel, enter the number of seconds for timeout between 5 and 300.
The factory default for this setting is 15 seconds.
] to access to [FTP Setup] screen (2/2) from screen (1/2).
Page 23).
55
Chapter 4 Setting from the Control Panel
4-7. FTP Setup
II Network Setup - Administrators only