Configure The Switch For Mac-Based Authentication - ProCurve 2610 Manual

Web and MAC Authentication
Configuring MAC Authentication on the Switch
3-24

Configure the Switch for MAC-Based Authentication

Command
Configuration Level
aaa port-access mac-based addr-format
[no] aaa port-access mac-based < port-list >
[addr-limit]
[addr-moves]
[auth-vid]
[logoff-period]
[max-requests]
[quiet-period]
[reauth-period]
[reauthenticate]
[server-timeout]
[unauth-vid]
Syntax: aaa port-access mac-based addr-format
<no-delimiter | single-dash | multi-dash | multi-colon | no-delimiter­
uppercase | single-dash-uppercase | multi-dash-uppercase | multi-
colon-uppercase>
Specifies the MAC address format to be used in the
RADIUS request message. This format must match the
format used to store the MAC addresses in the RADIUS
server. (Default: no-delimiter)
no-delimiter — specifies an aabbccddeeff format.
single-dash — specifies an aabbcc-ddeeff format.
multi-dash — specifies an aa-bb-cc-dd-ee-ff format.
multi-colon — specifies an aa:bb:cc:dd:ee:ff format.
no-delimiter-uppercase—specifies an AABBCCDDEEFF
format
single-dash-uppercase—specifies an AABBCC-DDEEFF
format
Page
3-24
3-25
3-25
3-25
3-25
3-26
3-26
3-26
3-26
3-26
3-26
3-27