ProCurve 2610 Manual page 290

Access Control Lists (ACLs)
Displaying ACL Data
Figure 9-22. Examples of Listings Showing the Content of Standard and Extended ACLs
9-58
For example, suppose you configured the following two ACLs in the switch:
ACL ID ACL Type Desired Action
1 Standard • Deny IP traffic from 18.28.236.77 and 18.29.140.107.
• Permit IP traffic from all other sources.
105 Extended • Permit any TCP traffic from 18.30.133.27 to any destination.
• Deny any other IP traffic from 18.30.133.(1-255).
• Permit all other IP traffic from any source to any destination.
Inspect the ACLs as follows:
Indicates whether the ACL
is assigned to an interface.
Indicates whether the ACL is assigned to an interface.
Indicates source and destination entries in the ACL.
Listing for a Standard ACL
Listing for an Extended ACL
Indicates that the source
TCP port can be any value.