ProCurve 2610 Manual page 317

Accounting Workstation 1
Accounting Workstation 2
Figure 10-6. Network Configuration for Named Source-Port Filters Example
Network Design
1. Accounting Workstations may only send traffic to the Accounting Server.
2. No Internet traffic may be sent to the Accounting Server or Workstations.
3 All other switch ports may only send traffic to Port 1.
The company wants to use named source-port filters to direct inbound traffic
only to the Internet while allowing only the two accounting workstations and
the accounting server to communicate with each other, and not the Internet.
Defining and Configuring Example Named Source-Port Filters. While
named source-port filters may be defined and configured in two steps, this is
not necessary. Here we define and configure each of the named source-port
filters for our example network in a single step.
Port 1
Port 10
Port 11
Port 7
Traffic/Security Filters
Using Source-Port Filters
Router to the
Internet
Accounting Server 1
10-13