Re-Order Channel Data - T&D TR-5xU Series User Manual

Re-order Channel Data: from the [Tools] Menu
You can re-order the data during graph display. There are two methods
to use when re-ordering channels:[Re-order by Dragging a Channel
Number] and [Specify the Channel Numbers to be Moved].
EX:Re-order by Dragging a Channel Number
[OK] Button
After make the necessary settings, by clicking the [OK] button, the channels will be
re-ordered and the graph will be re-drawn.
[Restore] Button
This command will become invalid after the settings procedure has been completed
and the [OK] button has been clicked. If you wish to restore channels, please re-order
channels again by following the above procedures.
Temperature/Humidity Graph
53
[OK]
Button
[Restore]
button
[Re-order]
Button
[ If you wish to move Ch.3 to Ch.7]
Drag the channel number you wish to
move (Ch 3) to the newly desired channel
number position (Ch 7) and drop it.
[Specify the Channel Numbers to be Moved]
Set as such: "From" → Ch.3 (original position),
"To" → Ch.7 (desired position); then click the
[Re-order] button. Click the [OK] button to
complete the settings. position (Ch 7) and drop
it.