When Using Tr-71U/72U/73U - T&D TR-5xU Series User Manual

When using TR-71U/72U/73U

Connect the TR-71U/72U/73U unit to your computer with the USB
Communication Cable (US-15C).
*1: If necessary, serial communication can be established by using our TR-73U communication
protocol (contact your local dealer) to write a software program. In this case, it will necessary
to connect to your computer using our optional serial communication cable (TR-07C). Please
contact your local provider for more details.
USB Port Mark
The USB cable is a USB-A Plug ⇔ USB mini-B plug type. Please connect to a
place with this kind of mark.
*It is necessary to install a USB device driver. Please see the Hardware User's Manual for details
about installation.
NOTE:
- To ensure proper communication, make sure that the USB cable connection is secure.
- This software is designed to operate TR-71U/72U/73U units with USB connections and cannot
operate the units via serial communication cables. If you wish to use serial cables to
communicate with TR-71U/72U units, please install [Thermo Recorder for Windows 4.11 (E) from
the CD-ROM menu and treat the units as TR-71S/72S units." Note that communication with
TR-73U via serial cable is not supported by the software.
- For more details about the use of [Thermo Recorder for Windows 4.11 (E)] please refer to the
PDF file contained in the CD-ROM.
NOTE:
- To communicate with a TR-71U/72U unit via serial communication cable, please use our optional
serial communication cable TR-07C.
- If the place of connection is incorrect, communication will not occur.
- To ensure proper communication, make sure that the communication cable connection is secure.
USB mini-B plug
To the data logger
USB cable already
connected to computer.
*1
USB A-plug
To your computer
Getting Ready
14