Making Warning Settings - T&D TR-5xU Series User Manual

Making Warning Settings: from the [Warning Settings] button
Under the [Start Recording] tab, click on the "Warning Settings" button
to open the "Warning Settings" window.
1.
Place a check next to [Set Limits].
2.
Settings can be made for the Upper and Lower Limits as well as the
Judgment Time.
- The Upper-Lower Limits must be set in a range from ― 60℃ to 155℃
- The judgment time can be set from the following selections: 10, 15, 20, 30 seconds or 1, 2, 5,
10, 15, 20, 30, 60 minutes.
By placing a checkmark, the settings for that item will become active.
3.
By clicking the [OK] button, a confirmation message will appear.
4.
By clicking the [OK] button, you will be returned to the [Start
Recording] Tab window
- Judgment Time
A warning occurs when either the set upper or lower limit has been exceeded or when
the judgment time has been exceeded. Upon a warning, the warning LED on the
TR-51S/52S will flash and a warning mark will appear in the display.
- Starting the Warning Monitoring Function...
If these settings are made in an environment where one of the limits is being
exceeded and recording is started, the monitoring function will enter "wait" mode.
Once the current measurement falls within the set limits, the monitoring function will
begin to operate.
Basic Function - TR-51S/52S
39
[OK] [Cancel]
Button Button
Judgment Time