Tr-51S/52S：basic Functions; Set The Recording Conditions - T&D TR-5xU Series User Manual

TR-51S/52S：Basic Functions
Here all settings and communication for TR-51S/52S (Data
Loggers) can be carried out. Connect the Data Logger to the
Computer so communication can be carried out.
Please make sure that your computer clock settings are correct.
- For details about connecting the data logger, see p. 13.
Before Using...
In order to make optimum use of the TR-51S/52S Data Logger's features, we strongly
suggest using in conjunction with TR-50U. This section explains operations when
using with Communication Port TR-50U.
When using with either Communication Port TR-50C, please take note if the following:
① TR-51S will be recognized as TR-51A and TR-52S will be recognized as TR-52;
for more details about operations see from p.32.
② Some functions, such as "Warning Settings" and "Adjustment", cannot be used.
③ The communication speed for downloading and other communications will be the
same as with our older models.

Set the Recording Conditions

1.
Click the [Start Recording] tab, and make the necessary recording
condition settings. For details about the various items and buttons,
please see the next page.
[Recording Start] Tab
2.
Click the [Start Recording] button to transmit the settings.
3.
After the transmission result message appears; click the [OK] button to
complete the setting procedure.
Basic Function - TR-51S/52S
37
[Recording Start]
Button
[Detailed Settings]
Button
[Recording Start]
Button
[Warning Settings]
Button