Communication Port Settings; Select Serial Port - T&D TR-5xU Series User Manual

Communication Port Settings

Setting Up the Communication Port for USB Communication or
RS-232C Communication. From the Main Window, open the Settings
and Communication window for TR-51A/52, and click on the
[Communication Port Settings] Tab.

Select Serial Port

When wishing to carry out communication using a serial
communication cable, please make serial port settings. Set which
serial port you would like to use to communicate with the data
logger. There are two methods to make the settings: [Auto-Detect]
and [Select Serial Port].
Connect the serial cable to port you wish to use and then connect it to the logger.
Examples of serial port marks
- If the place of connection is incorrect, communication will not occur.
- To ensure proper communication, make sure that the communication cable connection is secure.
15 Getting Ready
The communication cable connector is a D-Sub 9 pin female.
Connect to a place with a mark as such.
Click